manualshive.com logo in svg

Yamaha EX5, Owner'S Manual

The Yamaha EX5 is a powerful synthesizer designed for professional musicians. Discover its limitless possibilities with the comprehensive Owner's Manual, available for free download at manualshive.com. Unlock the full potential of your EX5 and explore its advanced features with this essential manual.

Share
Download
background image

150

Voice Mode

Wave Edit Mode

When you select a DRAM (RAM) bank and AWM
wave number (0001~1024) from the Bank and
Number in the WAVE display of the OSC menu in the
Voice Edit mode, [F3] (WAVE-EDIT) sub menu is
added to the screen.
Press [F3] to enter the Wave Edit mode. In the Wave
Edit mode, you can create waves that make up a voice
by layering preset samples and/or your own samples
that you created, designating the keyboard range for
each sample. Waves that you have created here can be
used the same as preset waves. 

(D)RAM bank/number is selectable, only when the AWM
elements are selected for editing.

Press [EXIT] to exit the Wave Edit mode. The
EX5/5R/7 returns to the original display (Voice Edit
mode). 

In Wave Edit mode, a sample wave is not changed and
therefore not destroyed. The edit here will not change the
sample waves but designate their layerings, their keyboard
ranges and mix balance between them.

In the Wave Edit mode, there are the following four
types of menus. Press each [F5] (NAME), [F6] (SMPL),
[F7] (MIX), or [F8] (ZONE) to switch to the necessary
display. Also for adding or deleting layers, the “ADD”
function is assigned to [F3] (ADD) and the delete
function is assigned to [F4] (DEL). 

[F5]: NAME (Settings for naming waves)
[F6]: SMPL (Settings related to playing back samples)
[F7]: MIX (Settings related to the output balance)
[F8]: ZONE (Settings related to the sound range)

F5

F6

F7

F8

■

4

Types of Source Data

Selects the type of data that will be copied. It is
possible to designate common data that affects all of
the elements, and specific data for specified
elements. 

When Common (All elements) is selected for the
Source Element: 

ALL (All voice data), PARAM (Parameter settings), ARP
(Arpeggio settings), EFCT (Effect settings), CTRL
(Controller settings), NAME (Voice name)

When an Element is selected for the Source Element: 

ALL (All the data for that element), OSC (Oscillator
settings), PITCH (Pitch settings), FILTER (Filter settings),
AMP (Amplitude settings), LFO (Low Frequency Oscillator
settings)

■

5

Current Voice

Fixed to the currently editing voice.

■

6

Destination Element

Sets the destination voice element that will be copied
to. This parameter is displayed only when an
element is selected in the Source Element parameter.

❏

Settings: 

EL1~4 (Normal voice), EL1~128 (Drum voice)

 Voice/E.qx  6/12/98  6:22 PM  Page 150

Summary of Contents for EX5

















































































































































































































































































































Reviews:

No comments

Related manuals for EX5

Octocam ECO VEDR Technical Manual preview
ECO VEDR
Brand: Octocam Pages: 35
Philips VoiceTracer VTR5080 User Manual preview
VoiceTracer VTR5080
Brand: Philips Pages: 44
Philips VTR8080 User Manual preview
VTR8080
Brand: Philips Pages: 46
Philips VTR7080 User Manual preview
VTR7080
Brand: Philips Pages: 52
Philips VoiceTracer User Manual preview
VoiceTracer
Brand: Philips Pages: 72
Yamaha Portatone PSR-172 Service Manual preview
Portatone PSR-172
Brand: Yamaha Pages: 16
Yamaha PortaTone PSR-15 Owner'S Manual preview
PortaTone PSR-15
Brand: Yamaha Pages: 16
Yamaha PortaTone PSR-16 Owner'S Manual preview
PortaTone PSR-16
Brand: Yamaha Pages: 20
Yamaha PORTATONE PSR-190 Owner'S Manual preview
PORTATONE PSR-190
Brand: Yamaha Pages: 26
Yamaha PortaTone PSR-180 Owner'S Manual preview
PortaTone PSR-180
Brand: Yamaha Pages: 26
Yamaha PortaTone PSR-185 Owner'S Manual preview
PortaTone PSR-185
Brand: Yamaha Pages: 28
Yamaha PortaTone PSR-150 Product Manual preview
PortaTone PSR-150
Brand: Yamaha Pages: 26
Yamaha Portatone PSR-18 (Japanese) User Manual preview
Portatone PSR-18
Brand: Yamaha Pages: 36
Yamaha PortaTone PSR-195 (French) Mode D'Emploi preview
PortaTone PSR-195
Brand: Yamaha Pages: 48
Yamaha Portatone PSR-172 Owner'S Manual preview
Portatone PSR-172
Brand: Yamaha Pages: 64
Yamaha Portatone PSR-160 Owner'S Manual preview
Portatone PSR-160
Brand: Yamaha Pages: 64
Yamaha Portatone PSR-1500 Service Manual preview
Portatone PSR-1500
Brand: Yamaha Pages: 162
Yamaha Portatone PSR-1500 Owner'S Manual preview
Portatone PSR-1500
Brand: Yamaha Pages: 220

Brands by name

Popular brands

Load more brands