85
V
oice Edit
7
5
Selecting Voices From a Voice
Disk (Optional)
You can also load voices from optional Voice Disks (for EL-37) to
the four User voices in the Voice Menu.
To do this:
1
Hold down the VOICE EDIT button in the DISPLAY SELECT
section and simultaneously press any one of the panel voice
buttons.
4
Using any of the Data Control button pairs, select the voice you wish
to load.
5
Play the keyboard to check the sound of the voice. Select other
voices (as you did in step #4 above) and check those sounds as well.
6
If you want to save the current voice to a User Voice space, select the
previous page, “SAVE” with the Page buttons.
PAGE
7
Press the Data Control button that corresponds to the User Voice
number you wish to save to.
Press one of the four Data Control buttons below “OK” in the display
to save the voice, or one of the four buttons below “Cancel” to abort
the operation and return to the previous display.
When the voice has been saved, a “completed!!” message appears.
2
Select the VOICE DISK page with the Page buttons.
The message “Insert Voice Disk!!” appears and prompts you the
operation.
PAGE
3
Insert the Voice Disk into the disk slot under the Music Disk
Recorder.
The voice number and name of the Voice Disk appears.
VOICE DISK Page
NOTE:
Any one of the voice sections can be
used here. Make sure that the volumes
of all other voices are set to off (the
minimum value) for monitoring the
Voice Disk voices.
Pressing these buttons steps through
the voice numbers; the name of each
voice appears on the display as well.
Refer to the list included with your Voice
Disk for voice numbers and names.
Summary of Contents for Electone EL-57
Page 31: ...27 Voice Sections 2 ...
Page 142: ...138 Appendix 13 MEMO ...