Yamaha Electone EL-57, Owner'S Manual

Page: 118 / 143

114
Rh
ythm Pr
ogr
am
8
About Entering Intro. And Ending Patterns:
Pressing the INTRO. ENDING button when at the first position in
the pattern row automatically enters an Intro pattern there. Pressing
the INTRO. ENDING button at any other position in the row enters
an Ending pattern.
NOTE:
Any existing pattern data that follows
an Ending pattern is automatically
deleted.
4
Use the cursor controls to move the cursor along the pattern row
in the display and select the position at which patterns will be
entered. Then use the Data Controls to enter and delete pattern
numbers in the pattern row.
SEQUENCE Page
1 -2 1 -1 1 -3
1 2
2 -2 2 -4 2 -5 2 -1 2 -3
Pattern row to be entered
Current measure
Currently selected pattern name
(and its variation)
1
Cursor Controls
1
-1
|<< Moves the cursor to the first position.
1
-2
< Moves the cursor one measure to the left.
1
-3
> Moves the cursor one measure to the right.
NOTE:
An Intro or Fill In pattern entered at
the first position is not registered as a
measure, and the current measure
display shows “-Bar” even though a
pattern has been entered.
NOTE:
The Coarse button can also be used
with the cursor controls to move the
cursor several steps at a time.
2
Data Controls
2
-1
PRESET/USER
Determins the type of rhythm, Preset or User.
2
-2
SET
For initially entering a pattern number to an empty position in
the pattern row, or for replacing a pattern at the cursor position.
2
-3
INS. (Insert)
For inserting a pattern number before the current cursor
position. The new pattern is entered to the cursor position and
all other patterns to the right of the cusor are moved to
accommodate the new number. The operation is the same as for
SET .
2
-4
DEL. (Delete)
For deleting a pattern number at the current cursor position.
2
-5
CLEAR
For erasing all patterns entered to the selected sequence. After
selecting CLEAR, the display for confirmation of the operation
appears.
Select “OK” to clear the currently selected rhythm sequence, or
“Cancel” to abort the operation and return to the previous
display.
NOTE:
To create a rhythm sequence, you
need to select a specific rhythm from
the Rhythm Menu beforehand.