2. Remove the screws
3
, and then remove the air fil-
ter cover
4
.
3. Remove the foam element
5
.
4. Wash the foam element in solvent and dry it.
Never use solvent while smoking or in the vicinity
of an open flame.
5. Oil the foam element and squeeze out excess oil.
The foam element should be wet but not dripping.
Do not wring out the foam element. This could
cause it to tear.
6. Insert the foam element into the air filter case.
TIP
Be sure the foam element sealing surface matches the
air filter so there is no air leak.
NOTICE
WARNING
– 26 –
710-037a
4
3
3
5
Recommended oil:
Foam-air-filter oil or SAE #20 motor oil
E01175
AIR FILTER
1. Remove the screws
1
and remove the cover
2
.
788-017
1
2
1
788-016a
1
2
2
9. Install the cover
1
and tighten the screws
2
.
7CF-9-16-b 11.3.21 14:49 Page 26
