Screen Functions
18
Sets routing, Dante input levels, analog output levels and output levels to a Dante net-
work.
q
Routing
Configure the routing of the audio signal.
Check the input source (INPUT) and output destination (OUTPUT), and set
at
the intersecting points. By default, signals from all input jacks will be output from the
speakers. Routing cannot be performed for shaded areas on the screen.
w
INPUT
Sets two Dante input levels, sensitivity and the degree of delay compensation.
•
DNT. IN1 LVL:
Sets Dante input level D1. It can be set in 0.5 dB increments.
•
DNT. IN2 LVL:
Sets Dante input level D2. It can be set in 0.5 dB increments.
•
DNT. SENS. (DANTE SENSITIVITY):
Sets the input sensitivity for the digital signal
sent from the Dante network to the amplifier. The input sensitivity set acts as the clip
level for the speakers. Set this to either -14 dBFS (default setting) or -6 dBFS. When
the [LEVEL] control is in the center position (0 dB), set this to -14 dBFS to ensure
proper balance with the input level from the Dante network and the analog input level
from devices having a maximum output of +24 dBu (which include many of Yamaha
digital mixers). Make fine adjustment with DNT. IN1 LVL/ DNT. IN2 LVL.
•
ALIGNMENT (DELAY ALIGNMENT):
Set this to ON, and set a delay here to com-
pensate for the time lag between the analog input and the Dante input. Note that the
appropriate delay setting will vary depending on the Dante settings configured and
the combination of connected devices. As the Dante input typically lags behind, this
delay setting will apply to the analog input. When you set the ALIGNMENT, refer to
the
“Route Latency Values” (page 44)
.
• On Dante models, the analog signal sent to the DZR-D or DXS-XLF-D can be output to the Dante
network and set as the input source for the mixer. (This will be supported in a future version).
• For more information about the signal flow in routing, see the
In the above screens, routing for OUTPUT D1/D2 and setting of the D1/D2 output level will be sup-
ported in a future version.
ROUTER Screen
NOTE
DZR-D series
Dante model
DXS-XLF-D series
e
q
w
e
q
w
NOTE
DZR series
Standard model
DXS-XLF series
e
q
e
q
Dante model
