DSR112
DSR115
DSR215
DSR118W
DXR8
DXR10
DXR12
DXR15
DXS12
DXS15
General
System Type
Frequency Range (-10dB)
Coverage Angle
Crossover Type
Crossover Frequency
Measured Maximum SPL (peak)
IEC noise@1m
Transducer
LF
HF
Enclosure
Material, Finish, Color
Floor Monitor Angle
Dimensions
(W x H x D, with rubber feet)
Net Weight
Handles
Pole Socket
Rigging Points
Optional Accessory (U-bracket)
Amplifier
Amplifier Type
Power Rating*1
Cooling
AD/DA
Signal Processing
HPF/LPF
DSP Preset
Protection
Connectors
Input
Impedance
Input Sensitivity
(LEVEL: Maximum)
Input Sensitivity
(LEVEL: Center)
Maximum Input
Level
Controls
Idle Power Consumption
1/8 Power Consumption
Power Requirements
General
System Type
Frequency Range (-10dB)
Coverage Angle
Crossover Type
Crossover Frequency
Measured Maximum SPL (peak)
IEC noise@1m
Transducer
LF
HF
Enclosure
Material, Finish, Color
Floor Monitor Angle
Dimensions
(W x H x D, with rubber feet)
Net Weight
Handles
Pole Socket
Rigging Points
Optional Accessory
Amplifier
Amplifier Type
Power Rating*1
Cooling
AD/DA
Signal Processing
HPF/LPF
DSP preset
Protection
Connectors
Input
Impedance
Input Sensitivity
(LEVEL: Maximum)
Input Sensitivity
(LEVEL: Center)
Maximum Input
Level
Controls
Idle Power Consumption
1/8 Power Consumption
Power Requirements
2-way, Bi-amp powered speaker, Bass-reflex type
55Hz - 20kHz
H90° x V60° constant directivity horn
FIR-X tuning™ (Linear phase FIR filter)
1.7kHz
134dB SPL
12" cone
3"
Neodymium
2"
1" throat compression driver
Neodymium
Wood, LINE-X®, Black
50°
370 x 638 x 368mm
(14-9/16" x 25-1/8" x 14-1/2")
21.2kg (47lbs)
Metal (Top x 1)
35mm (Bottom x 1)
Top x 2, Rear x 1
(Fits for M10 x 18mm eyebolts)
–
Class-D
1500W (LF: 1020W, HF: 480W)
1300W (LF: 850W, HF: 450W)
Natural convection
24bit 48kHz sampling
48bit (Accumulator: 76bit)
OFF, 120Hz 24dB/oct HPF
D-COUNTOR(Dynamic CONTOUR)
Clip limiting, Integral Power Protection, DC-fault
Thermal, Output over current
Thermal, Output over voltage, Output over current
XLR-3-31 x 1
TRS Phone Jack x 1
XLR-3-32 x 1
Parallel with INPUT
LINE: 12kΩ, MIC: 8kΩ
LINE: 0dBu, MIC: -25dBu
LINE: +7dBu, MIC: -18dBu
LINE: +24dBu, MIC: -11dBu
LEVEL, LINE/MIC, HPF, D-CONTOUR, FRONT LED DISABLE, POWER
30W
100W
North America: 120V, 60Hz, Japan: 100V, 50Hz/60Hz, Other areas: 220 - 240V, 50Hz
45Hz - 20kHz
136dB SPL
15" cone
–
442 x 755 x 423mm
(17-3/8" x 29-3/4" x 16-5/8")
28.0kg (62lbs)
Metal (Side x2)
45Hz - 20kHz
138dB SPL
2 x 15" cone
2.5"
Ferrite
–
467 x 1158 x 520mm
(18-3/8" x 45-9/16" x 20-1/2")
49.8kg (110lbs)
–
–
140W
Powered subwoofer, Bass-reflex type
40Hz - 130Hz
–
–
–
132dB SPL
18" cone
3"
Ferrite
–
–
–
–
520 x 638 x 584 mm
(20-1/2" x 25-1/8" x 23")
42.0kg (93lbs)
35mm (Top x 1)
–
1020W
800W
120Hz 24dB/oct LPF
–
XLR-3-31 x 2
XLR-3-32 x 2
Parallel with INPUT
10kΩ
0dBu
–
–
–
+24dBu
LEVEL, POLARITY,
FRONT LED DISABLE, POWER
100W
Diameter
Voice Coil
Magnet
Diaphragm
Type
Magnet
Dynamic
Continuous
Speaker
Amplifier
Power Supply
Input
Output
INPUT1
INPUT2, 3
INPUT1
INPUT2, 3
INPUT1
INPUT2, 3
INPUT1
INPUT2, 3
Diameter
Voice Coil
Magnet
Diaphragm
Type
Magnet
Dynamic
Continuous
Speaker
Amplifier
Power Supply
Input
Output
2-way, Bi-amp powered speaker, Bass-reflex type
57Hz – 20kHz
H90° x V60° constant directivity horn
FIR-X tuning™ (Linear phase FIR filter)
2.4kHz
129dB SPL
8" cone
2"
Ferrite
1.4"
1" throat compression driver
Ferrite
ABS, Matte black
–
280 x 458 x 280 mm
(11" x 18" x 11")
13.5kg (29.8lbs)
Aluminium die-cast (Top x 1)
35mm with 2-way feature (0 or 7 degrees)
Top x 2, Rear x 1
(Fits for M8 x 15mm eyebolts)
UB-DXR8
Class-D
1100W (LF: 950W, HF: 150W)
700W (LF: 600W, HF: 100W)
Fan cooling, 4 speeds
24bit 48kHz sampling
48bit (Accumulator: 76bit)
OFF, 100, 120Hz 24dB/oct HPF
D-CONTOUR: FOH/MAIN, MONITOR, OFF
Clip limiting, Integral Power Protection, DC-fault
Thermal, Output over current
Thermal, Output over voltage, Output over current
INPUT1: XLR3-31 x 1, INPUT2: Phone x 2,
INPUT3: RCA PIN x 2
THRU: XLR3-32 x 1 (Parallel with INPUT1),
LINK OUT: XLR3-32 x 1
LINE: 12kΩ, MIC: 8kΩ
L, R: 40kΩ, MONO: 20kΩ
LINE: +1dBu, MIC: -32dBu
-13dBu
LINE: +11dBu, MIC: -22dBu
-3dBu
LINE: +24dBu, MIC: +20dBu
+16dBu
LEVEL x 3, LINE/MIC, HPF, D-CONTOUR, FRONT LED DISABLE, LINK MODE, POWER
35W
90W
100V – 240V, 50Hz/60Hz
56Hz – 20kHz
2.3kHz
131dB SPL
10" cone
2"
50°
305 x 502 x 310 mm
(12" x 19-3/4" x 12-2/8")
14.6kg (32.2lbs)
UB-DXR10
52Hz – 20kHz
2.1kHz
132dB SPL
12" cone
2.5"
50° Symmetrical
362 x 601 x 350 mm
(14-1/4" x 23-5/8" x 13-3/4")
19.3kg (42.5lbs)
Aluminium die-cast (Side x 2)
Top x 2, Rear x 1
(Fits for M10 x 18mm eyebolts)
UB-DXR12
110W
49Hz – 20kHz
2.1kHz
133dB SPL
15" cone
2.5"
50° Symmetrical
445 x 700 x 380 mm
(17-1/2" x 27-1/2" x 15")
22.5kg (49.6lbs)
UB-DXR15
Powered subwoofer, Band-pass type
47Hz – 160Hz
–
–
–
131dB SPL
12" cone
2.5"
–
–
–
Wood, Paint, Black
–
397 x 563 x 594 mm
(15-5/8" x 22-1/8" x 23-3/8")
33.0kg (72.8lbs)
Metal (Side x 2)
35mm (Top x 1)
–
–
Class-D
950W
600W
80, 100, 120Hz 24dB/oct LPF
D-XSUB: BOOST, XTENDED-LF, OFF
INPUT: XLR3-31 x 2
THRU: XLR3-32 x 2 (Parallel with INPUT)
10kΩ
–
+1dBu
–
+11dBu
–
+24dBu
–
LEVEL, POLARITY, LPF, D-XSUB,
FRONT LED DISABLE, POWER
120W
45Hz – 160Hz
132dB SPL
15" cone
2.5"
478 x 618 x 624 mm
(18-7/8" x 24-3/8" x 24-1/2")
38.0kg (83.8lbs)
Specifications
Specifications
Specifications
0dBu is referenced to 0.775Vrms.
*1 Power rating (120V, 25°C). This is total value of individual output power.
