22
ENGLISH
PCM/
U
DIGITAL
MPEG
COAXIAL
DIGITAL
OPTICAL
L
AUDIO OUT
VIDEO OUT
SUBWOOFER
CENTER SURROUND
6CH DISCRETE
MIXED 2CH
VIDEO
MAIN
S VIDEO
L
R
R
R
L
2
1
Connection
Notes when connecting the optical digital audio cable
Á
Remove the dust protection cap from the connector and connect the
cable firmly so that the configurations of both the cable and the con-
nector match.
Á
Keep the dust protection cap and to protect against dust, always re-
attach the cap when not using the connector.
Concerning the audio output from the unit’s optical/coax-
ial digital audio output connector
\
1
The type of audio output from the connector can be selected by the
initial settings. (See page 76.)
\
2
Sound having 96 kHz sampling is converted into 48 kHz sampling
when it is output from the unit’s optical/coaxial digital audio output
connector.
For your reference:
Á
Dolby Digital (AC-3) is a digital sound compression technique devel-
oped by the Dolby Laboratories Licensing Corporation.
Supporting 5.1-channel surround sound, as well as stereo (2-chan-
nel) sound, this technique enables a large quantity of sound data to
be efficiently recorded on a disc.
Á
Linear PCM is a signal recording format used in CDs. While CDs
are recorded in 44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit
up to 96 kHz/24 bit.
Á
If you have a Dolby Pro Logic Surround decoder, you will obtain the
full benefit of Pro Logic from the same DVD movies that provide full
5.1-channel Dolby Digital soundtracks, as well as from titles with the
Dolby Surround mark.
Disc
DVD
Video
CD
CD
Sound
recording
format
Dolby Digital
(AC-3)
Linear PCM
(48/96 kHz
16/20/24 bit)
dts
MPEG 1
Linear PCM
Optical/coaxial digital audio
output from connector
Dolby Digital bitstream
(2–5.1ch) or PCM (2ch)
(48 kHz/16 bit)
\
1
Linear PCM (2ch)
(48 kHz sampling/16 bit only)
\
2
or no output
\
1
Bitstream or no output
\
1
PCM
(44.1 kHz sampling)
Linear PCM
(44.1 kHz sampling)
Dust protection cap
Capuchon anti-poussière
Toda de protección contra el polvo
Manufactured under license from Dolby Labo-
ratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works.
j
1992–1997 Dolby Labora-
tories, Inc. All rights reserved.
Fabricado bajo licencia de los Laboratorios Dolby.
“Dolby” y el símbolo de doble D son marcas regis-
tradas de los Laboratorios Dolby. Trabajos Con-
fidenciales No Publicados.
h
1992–1997 Dolby
Laboratories, Inc. Todos los derechos están reser-
vados.
Fabriqué sous licence de Dolby Laboratories. “Dol-
by” et le symbole double-D sont des marques com-
merciales de Dolby Laboratories. Projet non publié
confidentiel.
j
1992–1997 Dolby Laboratories,
Inc. Tous droits réservés.
Caution for the optical/coaxial digital audio output
connector:
È
When connecting an amplifier (with an optical/
coaxial digital input connector) which contains
the Dolby Digital (AC-3) or dts decorder
Á
Be sure to select “Bitstream” both at “2 Dolby Digi-
tal” and “3 dts” of the initial setting “7 Digital Audio
Output”. (See page 76.)
È
When connecting an amplifier (with an optical/
coaxial digital input connector) which does not
contain the Dolby Digital (AC-3) or dts decoder
Á
Be sure to select “PCM” at “2 Dolby Digital” and
“Off” at “3 dts” of the initial setting “7 Digital Audio
Output”. (See page 76.)
Á
Otherwise any attempt to play DVDs may cause
such a high level of noise that it may be harmful to
your ears and damage your speakers.
Á
Video CDs and CDs can be played as they would
normally be played.
Note:
Á
Some dts decoders which do not support DVD-dts interface may not
work properly with the DVD/VIDEO CD/CD player.
Downloaded From Disc-Player.com Yamaha Manuals
