DVD-S2300
20
DVD-S2300
Item
Player mode and
Function
Display
Cancellation
button combination
method
CD laser
In STOP mode, press CD laser drive current is
LDC_028_026
Cancelled
drive current "
" and "
" measured and the result is
automatically 5
measurement buttons on the player, displayed together with the initial
seconds later.
and "ON SCREEN"
value stored in EEPROM.
button on the remote
After the measurement, CD
control unit.
laser emission is kept on. It is
The value denotes the current in decimal
turned off when the "POWER"
notation.
key is switched off.
The above example shows the initial
current is 28mA and the measured value
is 26mA.
DVD user
In STOP mode, press All settings on the setup menu
"Initialized" is desplayed on the video
settings
"
", "
" and
return to factory defaults.
monitor connected to the player.
initialization
"
" buttons on
the player for 3
seconds or longer.
Measured current
Initial current stored in EEPROM
CD laser current measurement mode
↑
↑
↑
2. Self-Diagnosis Function (UHF Display)
This unit incorporates a convenient self-diagnosis function for use in troubleshooting.
Display method
Display
Diagnosis
Service numbers
U11
Focus error
displayed during use.
H01
Tray loading error
H02
Spindle servo error
H03
Traverse error
H04
Tracking servo error
H05
Seek error
H06
Power supply error
In STOP mode, press
F0**
Disc format error
" " and " " buttons on F1**
Disc code error
the player, and " 0 " button F2**
Decoder LSI error
on the remote control unit. F3**
SDRAM error
F4**
IIC BUS error
Refer to error code.
F5**
DSC error
F6**
ECC error
F7**
Microprocessor error
F8**
Microprocessor error
