DVD-S2300
18
DVD-S2300
Item
Player mode and
Function
Display
Cancellation
button combination
method
Error code
In STOP mode, press The latest error code stored in
Error code (play_err) is expressed in
Cancelled
check
"
" and "
"
EEPROM is displayed.
the following convention.
automatically 5
buttons on the player,
Error code = 0 x DAXX is expressed:
→
nn UXX
seconds later.
and "0" button on the
Error code = 0 x DBXX is expressed:
→
nn HXX
remote control unit.
Error code = 0 x DXXX is expressed:
→
nn FXXX
Error code = 0 x 0000 is expressed:
→
nn F–––
* "nn" denotes the serial number of history.
Jitter check
In PLAY mode, press
Jitter rate is measured and
J_xxx_yyy_zz
Press STOP or
"
" and "
"
displayed.
OPEN button.
buttons on the player,
and "5" button on the
remote control unit.
Jitter rate is shown in decimal notation to
one place of decimal.
Focus drive value is shown in
hexadecimal notation.
Region
In STOP mode, press The region numbers and video
x_yy_zzz
Cancelled
display
"
" and "
"
format are displayed.
automatically 5
buttons on the player,
seconds later.
and "6" button on the
remote control unit.
Version
In STOP mode, press DVD module firmware version
srrr_xyzzzz
Cancelled
display
"
" and "
"
is displayed.
automatically 5
buttons on the player,
seconds later.
and "7" button on the
remote control unit.
DVD laser
In STOP mode, press DVD laser drive current is
LDD_034_032
Cancelled
drive current "
" and "
"
measured and the result is
automatically 5
measurement buttons on the player, displayed together with the initial
seconds later.
and "ON SCREEN"
value stored in EEPROM.
button on the remote
After the measurement, DVD
control unit.
laser emission is kept on. It is
The value denotes the current in decimal
turned off when the "POWER"
notation.
key is switched off.
The above example shows the initial
current is 34mA and the measured value
is 32mA.
Initial setting In STOP mode, press The initial current value for each
LDO_034_028
Cancelled
of laser drive "
" and "
"
DVD laser and CD laser is
automatically 5
current
buttons on the player, separetely saved in EEPROM.
seconds later.
and "
" button on
the remote control
unit.
The value denotes the current in decimal
notation. The above example shows the
initial current is 34mA and 28mA for DVD
laser and CD laser respectively when the
laser is switched on.
■
SERVICE MODE AND SELF-DIAGNOSIS FUNCTION
1. Service Mode
a. Turn on the POWER switch.
b. Press the SACD/DVD button to set to the DVD mode, and the DVD mode indicator lights up.
c. It is possible to use the following service modes, using the buttons on the player and the remote control unit in
combination.
Note: For jitter check, load the DVD test disc. [DVDT-S15 (AAX07320) or DVDT-S01]
Focus drive value
Read error counter
Jitter rate
Jitter check mode
↑ ↑
↑ ↑
N: NTSC / 6: PAL60
N: noPAL / P:PAL
Region No.
↑ ↑↑
Version number
↑
Measured current
Initial current stored in EEPROM
DVD laser current measurement mode
↑
↑
↑
CD laser current measurement
DVD laser current measurement
Laser current initial setting mode
↑
↑
↑
