Yamaha DTXPRESS, Owner'S Manual

Page: 41 / 88

41
Drum Kit Voice Edit Mode
pad 9 Pad input for Trigger Input Jack 9.
pad 10 Pad input for Trigger Input Jack 10.
* According to the setting in the Utility Mode’s [1-1. Learn Mode]
(P. 52), the input source can be assigned by hitting the pad.
* Monaural pads do not have a rim switch function.
w
Layer Number
[Range] 1, 2, -
When 2 layers are used, use this setting to select which layer (“ 1 ”
or “ 2 ”) will be set.
When only 1 voice is set, “ -- ” will appear and you will not be
able to switch.
* Use the [1-1. Voice] display to set whether 2 layer or 1 voice will
be used.
If the same MIDI note number is set to more than one pad
within the same drum kit, the lowest numbered Trigger
Input Jack will take priority. Regardless of which pad is
struck, the same voice (setting) will be delivered.
1-1. Voice
This function assigns the voice (drum voice)
e
for each input
source
q
. Two voices
w
can be assigned for simultaneous deliv-
ery to 1 input source (when the pad is hit once).
q
IN (Input Source)
w
Layer Number
Assigns the input source and layer for the setting. (Refer to P. 40)
Sets whether 2 layer or 1 voice will be used in this display. Only
“
1 ” or “ 2 ” can be selected in the Layer Number.
e
Voice Category
Selects the drum voice category that will be delivered by Layer 2
of Input Source
q
.
Each of the following characters indicates a drum voice category.
K : Acoustic Kick
k : Electric Kick
S : Acoustic Snare
s : Electric Snare
T : Acoustic Tom
t : Electric Tom
C : Cymbal
H : Hi-hat
P : Percussion
E : Effect 1
e : Effect 2
L : Drum Loop
m : misc. voices
r
Voice Number Voice Name
Selects the assigned voice. The Voice Number ( 1 - 127 ) and Voice
Name will be displayed. When 2 Layer is selected, “ * ” will be
displayed next to the Voice Name.
When “
0 ” is selected, “ NoAssign ” will be displayed in place of
the Voice Name and no sound will be delivered.
* Refer to the [Drum Voice List] (P. 68).
1-2. Volume, Pan
This function sets the Volume
e
and Pan
r
(the position in the
stereo field) for each drum voice that is delivered by each layer
w
of the input source
q
.
q
IN (Input Source)
w
Layer Number
Assigns the input source and layer for setting. (Refer to P. 40)
e
Vol (Volume)
[Range] 0-127
r
Pan
[Range] L64 to C to R64
1-3. Tuning
This function sets the pitch for each drum voice that is delivered
by each layer
w
of the input source
q
.
q
IN (Input Source)
w
Layer Number
Assigns the input source and layer for setting. (Refer to P. 40)
e
Tune C (Tune Coarse)
[Range] –24 to 0 to +24
Tuning can be set increments of a half step.
r
Tune F (Tune Fine)
[Range] –64 to 0 to +63
Tuning can be set increments of approximately 1.17 cents.
KIT IN=pad 1 V=2
=K/019 MapleA20
e r
q
KIT IN=pad 1 V=1
Vol= 120 Pan= C
e r
q w
KIT IN=pad 1 V=1
Tune C= 0 F= 0
e r
q w
w