Transferring Song Files
7
DTX400K/DTX430K/DTX450K MIDI Reference
5.
Click
Flash Memory
at the left of the main window.
6.
Select the files you wish to transfer and click the Move button.
You will be asked to confirm if you wish to proceed. Clicking the Cancel button in this window will end the process without trans-
ferring any files.
7.
Click the OK button to start file transfer.
8.
When files have been successfully transferred, they will be temporarily stored in
Musicsoft Down-
loader
and listed in the corresponding area in the top half of the main window.
9.
From the list of temporarily stored files, select the files that you wish to transfer to your computer.
10.
Click
My Computer
in the list at the left of the main window, choose a destination for the files, and
click the Move button.
You will be asked to confirm if you wish to proceed. Clicking the Cancel button in this window will end the process without trans-
ferring any files.
11.
Click the OK button to transfer the selected files from the temporary storage area to your computer.
12.
Confirm that the song data has been correctly transferred to your computer.
13.
Close the main window to shut down
Musicsoft Downloader
.
NOTICE
Do not disconnect the USB cable while files are being transferred. In addition, the drum module should not be operated at this
time. Failure to avoid these precautions can not only prevent transferred song data from being saved correctly, but in certain
cases, could also lead to the entire drum-module memory being deleted.
NOTE
When you transfer a song file to your computer, it will be deleted from the drum module’s memory. In its place, the preset song
originally assigned to the corresponding song number will be restored.
10
10
8,9
13
