Yamaha DTX-PRO Reference Manual Download Page 145

Page: 145 / 145

Reference

145

DTX-PRO DTX-PROX Reference Manual

Effect Type



MFX Type



InsertionType

(*) The effect changes according to the tempo setting of the module.

Name

Description

Thru

No Effect.

Analog Delay 1

Analog delay driven by bucket-brigade device (BBD) chips with short delay setting.

Analog Delay 2

Analog delay driven by bucket-brigade device (BBD) chips with long delay setting.

G Chorus

A Chorus Effect that produces a richer and more complex modulation than normal chorus.

2 Modulator

A Chorus Effect consisting of pitch modulation and amplitude modulation.

SPX Chorus

An effect which uses a 3-phase LFO to add modulation and spaciousness to the sound.

Symphonic

A 3-phase Chorus which uses a complex LFO wave.

VCM Flanger

These effects emulate the characteristics of an analog flanger used in the 1970s, recreating a warm, high-qual-
ity flanger effect.

Dynamic Flanger

Dynamically controlled flanger.

VCM Phaser

This effect emulates the characteristics of analog phasers used in the 1970s, recreating a warm, high-quality
phaser effect. This is a stereo phaser with VCM technology for producing a vintage sound.

Dynamic Phaser

Dynamically controlled phase shifter.

Overdrive

Stereo distortion.

Compressor

Conventional compressor.

Lo-Fi

Degrades the audio quality of the input signal to get a lo-fi sound.

Noisy

Adds noise to the current sound.

Turntable

Simulates the noise of an analog record.

Bit Crusher

Produces distortion by reducing the resolution or bandwidth of the digital sound.

Dynamic RingMod

Dynamically controlled Ring Modulator.

Dynamic Filter

Dynamically controlled filter.

TempoSpiralizrF

Spiralizer with tempo-synchronized LFO.

(*)

Tech Modulation

Adds a unique feeling of modulation similar to ring modulation.

Control Filter

Manually controlled filter.

Ring Modulator

An effect that modifies the pitch by applying Amplitude Modulation to the frequency of the input.

Presence

Effect for bringing out the hidden presence in the input sounds.

Harmo Enhancer

Layers additional harmonics to the input signal to make the sound stand out.

Pitch Change

Changes the pitch of the input signal.

4Tap Delay 8th

Four separate Delay effects are synchronized to an eighth note tempo.

(*)

4Tap Delay 16th

Four separate Delay effects are synchronized to a sixteenth note tempo.

(*)

4Tap Delay 32nd

Four separate Delay effects are synchronized to a thirty-second note tempo.

(*)

High Gain

An overdrive effect variation.

Modern

An overdrive effect variation.

Crunch

An overdrive effect variation.

PROX

Summary of Contents for DTX-PRO


















































































































































Search results

Summary of Contents for DTX-PRO

Reviews:

Related manuals for DTX-PRO

Brands by name

Popular brands

Yamaha DTX-PRO, Reference Manual

Search results

Summary of Contents for DTX-PRO

Reviews:

Related manuals for DTX-PRO

Brands by name

Popular brands