6
PCY90AT
Owner’s Manual
As shown in the figures, set up your cymbal pad on an electronic drum rack.
Attaching the cymbal holder
1.
Take the cymbal holder from the package and loosen the clamp bolts. (See Figure 1.)
2.
Slide the holder clamp onto the electronic drum rack as shown by the arrow below. (See Figure 2.)
3.
Tighten the clamp bolts to secure the cymbal holder in place.
Setting Up
CAUTION
If the clamp bolts and other fasteners are not sufficiently tightened, your pad unit may fall, possibly
causing injury. It is important, therefore, that you mount your pad unit securely on the drum rack. In
addition, you should avoid placing your rack on an uneven surface as this may cause it to fall over,
again increasing the risk of injury.
Clamp bolts
Cymbal holder
Holder clamp
Figure 1
Figure 2
Summary of Contents for DTX Drums PCY90AT
Page 10: ......
