Roland OCTAPAD SPD-30 Owner'S Manual Download

Page: 1 / 18

The multi-effects feature 30 different kinds of effects.

Number

Effect Name

THRU

SUPER FILTER

STEP FILTER

DRIVE

AUTO WAH

COMPRESSOR

LO-FI COMPRESS

DISTORTION

OVERDRIVE

EQUALIZER

ISOLATOR

SLICER

RING MODULATOR

STEP RINGMOD

PITCH SHIFT

STEREO DELAY

3TAP PAN DELAY

REVERSE DELAY

TAPE ECHO

CHORUS

HEXA-CHORUS

SPACE-D

PHASER

STEP PHASER

INFINITE PHASER

FLANGER

STEP FLANGER

AUTO PAN

ROTARY

REVERB

LONG REVERB

About Note Values

Some effect parameters (such as Rate or Delay Time) can

be set by using note values.
Whenever the “BPM Sync” parameter is set to “ON,” settings

can be made in terms of a note value, so when the effect

is applied, it will be synchronized to the tempo set for the

Kit or Phrase.
note:

Dotted quarter note

Double-note triplet

Sixteenth-note triplet

Sixty-fourth note

Quarter-note triplet

Half-note triplet

Whole-note triplet

Eighth-note triplet

Dotted whole note

Dotted half note

Dotted thirty-second note

Thirty-second-note triplet

Dotted eighth note

Dotted sixteenth note

Double note

Whole note

Thirty-second note

Sixty-fourth-note triplet

Eighth note

Quarter note

Half note

Sixteenth note

When “BPM Sync” is set to “OFF,” a numerical value can be

set for the relevant items.

NOTE

If you set the delay time as a note value, slowing down

the tempo will not change the delay time beyond a

certain length. There is an upper limit for the delay

time so if it is set as a note value and you slow down

the tempo until this upper limit is reached, the delay

time cannot change any further. This upper limit is the

maximum value that can be specified when setting the

delay time as a numerical value.

About Knob Indications

When the icons shown below appear along with a

parameter in the FX-EDIT screen, it means that this FX

parameter can be controlled with the knobs in the FX

CONTROL screen. For each FX, the optimal parameters

have been assigned and made available for control.

Knob 1

Knob 2

Knob 3

OCTAPAD SPD-30 Effects List

CORPORATION.

1PS

Summary of Contents for OCTAPAD SPD-30



















Search results

Summary of Contents for OCTAPAD SPD-30

Reviews:

Related manuals for OCTAPAD SPD-30

Brands by name

Popular brands

Roland OCTAPAD SPD-30, Owner'S Manual

Search results

Summary of Contents for OCTAPAD SPD-30

Reviews:

Related manuals for OCTAPAD SPD-30

Brands by name

Popular brands