menu groups (Image, Signal, Initial and
Setup), each offering a wide range of
adjustable parameters, some of which have
submenus. In addition, a one-line menu can
be superimposed on the screen while
viewing a movie
or other source,
for “fine-tuning”
the image as you
watch.
Custom Installation Solutions
The DPX-1100 facilitates custom installation
with an RS-232C interface, IR control
in/out ports for using an optional wired
connection to the IR remote control, front
and rear IR sensors and a powerful DC12V,
max. 200mA trigger out with selectable
trigger timing.
Silent Operation
The DPX-1100 runs with the quiet efficiency
you expect from a high quality home theater
projector. It uses effective DMD and power
supply ducting, while minimizing cooling fan
operation by continually adjusting it in
accordance with picture brightness.
HDMI Terminal
Most high-end projectors provide DVI
connection, but the DPX-1100 goes further
with an HDMI connection. HDMI can
handle digital signals like DVI, and a variety
of other information as well, such as
component type, scan status and colorimetry,
which can be adjusted.
Full-Function Remote
Control
The remote control unit gives
you total control over all of the
projector’s functions and
settings. It is designed for easy
gripping and use, and can be
pointed at either the front or
the back of the projector, from
as far as 7m (23 feet) away.
Other Notable Features
䡲
Smart Zoom for projecting 4:3 broadcasts
onto a full 16:9 screen with no distortion
in the middle
䡲
Cinema Zoom with Zoom Up and Zoom
Out for eliminating bars on the top and
bottom of the 16:9 screen
䡲
Selectable video scan (100% or 94%)
䡲
Automatic aspect conversion
䡲
Manual display aspect selection (8 modes)
䡲
Still (freeze frame) function
䡲
Operation
status lock
䡲
Test pattern
selection
䡲
Message display
keeps you
informed of
operating status
䡲
Four warning
indicators
(lamp, cover,
temperature,
fan)
Extraordinary Picture Quality.
5
In addition to the Input A and Input B (Component Video and RGB signal) terminals, the DPX-1100 rear panel offers an
HDMI input terminal, composite video input terminals, D4 video input terminal, remote in/out terminal, and RS-232C and
Trigger out (12V/200mA) terminals.
Accessories
• PJL-427: Optional lamp cartridge
• PMT-L31: Optional installation brackets for low ceiling
• PMT-H35: Optional installation brackets for high ceiling
DPX-1100 Main Specifications
• Projection System: Digital Light Processing (DLP)™
Technology • Device Type—Size: 0.8 inch DMD™ HD2+;
Pixel: 1,280 x 720 • Projection Lens: F=2.7-5.0, f=24.3-
38.9mm • Functions: Zoom (Motorized): x 1.6; Focus
(Motorized); Lens Shift (Motorized): Vertical Up/Down
50%; Iris (Motorized): 3-Step • Projection Ratio: 1.355-
2.168 (3.0 - 4.8m, 100" 16:9) • Screen Size: 60-200 inch
(16:9) • Lamp: 270W SHP, 2,000 hours • Brightness: 800
ANSI lumens (White Boost: on, Iris: off); 400 ANSI
lumens (White Boost: on, Iris: Fully on) • Contrast Ratio
4,000:1 (White Boost: on, Iris: Fully on); 2,000:1 (White
Boost: on, Iris: off) • Color Format: NTSC, PAL,
SECAM, NTSC4.43, PAL-M, PAL-N, PAL60 • PC Signal:
VGA, SVGA, XGA, MAC13", MAC16, MAC19,
iMAC_VGA, iMAC_SVGA • Scan Frequency—Horizontal:
15-8 kHz; Vertical: 50-85 Hz (Analog), 60 Hz/50 Hz
(Digital) • Power Consumption; 375 W (Standby: 0.1 W)
• Dimensions (W x H x D): 19-1/2” x 7-7/16” x 18-
5/16” • Weight: 30.4 lbs.
On-Screen Display
derived from the three main colors). The third
mode is RGBYCM, which allows each of the
six colors to be directly specified by entering x
and y coordinates. There are six memory
presets for storing personal adjustments.
Color Temperature Adjustment
You can adjust the correlated color
temperature in 500K increments between
5,000K and 10,000K, in order to achieve
accurate color fidelity. A graph on the color
temperature menu facilitates this operation. In
order to maintain perfect color balance when
the settings are
changed, automatic
color balance
calculation and
adjustment is
provided.
Mounting Flexibility
Mounting the DPX-1100 is easy and versatile.
Lens-to-screen distance can be anywhere from
9 ft. 10 in. to 15 ft. 9 in. (100” screen)
thanks to the powerful 1.6x zoom lens.
Motorized vertical lens shift is ±50% of
projection height , so the projector can be
used at any height between the top and
bottom of the screen. Iris, zoom and focus
adjustments are also motorized.
Six Memory Settings
There are six memory positions for storing
different combinations of parameter settings,
and each can be used for two input signals,
meaning you can call up any of 12 memory
conditions. You can store the same
parameter combination for DVD and
HDTV, for example. The projector
automatically adjusts when the source is
changed, so you do not have to select a
different memory position.
Lamp Power Selector
The multi-step Lamp Power Selector makes
it possible to adjust for optimum brightness
and contrast with different levels of room
lighting and video sources. It can also be
used to extend lamp life (at 80% brightness,
lamp life goes from 2,000 to 2,500 hours).
Extensive Menus Plus Handy
One-Line Menu
The DPX-1100 has an extensive range of
menus, viewable on-screen and managed via
the remote control. There are four main
DPX-1100 Control Panel
DIGITAL CINEMA PROJECTOR
19-1/2”
18-5/16”
7-7/16”
