Yamaha DT125R 2004 Owner'S Manual Download Page 19

Page: 19 / 74

EAU12890

Brake lever

1. Brake lever

The brake lever is located at the right
handlebar grip. To apply the front bra-
ke, pull the lever toward the handle-
bar grip.

EAU12941

Brake pedal

1. Brake pedal

The brake pedal is on the right side of
the motorcycle. To apply the rear bra-
ke, press down on the brake pedal.

EAU13150

Fuel tank cap

To remove the fuel tank cap

1. Insert the key into the lock and

turn it 1/4 turn counterclockwise.

2. Turn the fuel tank cap 1/3 turn

counterclockwise and pull it off.

1. Fuel tank cap
2. Unlock
3. Open

To install the fuel tank cap

1. Insert the fuel tank cap into the

tank opening with the key inser-
ted in the lock, and then turn the
cap 1/3 turn clockwise.

2. Turn the key 1/4 turn clockwise,

and then remove it.

INSTRUMENT AND CONTROL FUNCTIONS

3-5

1D0-F8199-E2.qxd 20/9/04 11:32 Página 19

All manuals and user guides at all-guides.com

Summary of Contents for DT125R 2004











































































Search results

Summary of Contents for DT125R 2004

Reviews:

Related manuals for DT125R 2004

Brands by name

Popular brands

Yamaha DT125R 2004, Owner'S Manual

Search results

Summary of Contents for DT125R 2004

Reviews:

Related manuals for DT125R 2004

Brands by name

Popular brands