Yamaha DT125R 2004 Owner'S Manual Download Page 27 | Manualshive

Page: 27 / 74

background image

PRE-OPERATION CHECKS

4-2

4

EAU15603

Pre-operation check list

ITEM

CHECKS

PAGE

• Check fuel level in fuel tank.

Fuel

• Refuel if necessary.

3-6

• Check fuel line for leakage.
• Check oil level in oil tank.

2-stroke engine oil

• If necessary, add recommended oil to specified level.

3-7

• Check vehicle for oil leakage.

Transmission oil

• Check oil level in transmission case.

6-7

• If necessary, add recommended oil to specified level.
• Check coolant level in reservoir.

Coolant

• If necessary, add recommended coolant to specified level.

6-8

• Check cooling system for leakage.
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.

Front brake

• Check brake pads for wear.

6-16/6-18

• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add recommended brake fluid to specified level.
• Check hydraulic system for leakage.
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.

Rear brake

• Check brake pads for wear.

6-16/6-18

• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add recommended brake fluid to specified level.
• Check hydraulic system for leakage.
• Check operation.

Clutch

• Lubricate cable if necessary.

6-15

• Check lever free play.
• Adjust if necessary.
• Make sure that operation is smooth.

Throttle grip

• Check cable free play.

6-12/6-21

• If necessary, have Yamaha dealer adjust cable free play and lubricate
cable andgrip housing.

1D0-F8199-E2.qxd 20/9/04 11:32 Página 25

All manuals and user guides at all-guides.com

«
...
25
26
27
28
29
...
»

Summary of Contents for DT125R 2004











































































Reviews:

No comments

Related manuals for DT125R 2004

Brand: Yamaha Pages: 860

Brand: GAS GAS Pages: 34

Brand: hepco & becker Pages: 5

Brand: DAELIM Pages: 93

640 LC4 ENDURO 2006

Brand: KTM Pages: 60

Brand: PIAGGIO Pages: 275

Brand: hepco & becker Pages: 2

Brand: hepco & becker Pages: 3

Brand: Thunderbike Pages: 8

Brand: rizoma Pages: 10

Brand: rizoma Pages: 16

Brand: KTM Pages: 20

Brand: HAUL MASTER Pages: 8

Brand: BMW Motorrad Pages: 28

Brand: BMW Motorrad Pages: 170

Brand: Chicago Electric Pages: 12

TERMOSCUD-R204X

Brand: tucanourbano Pages: 2

TERMOSCUD R200X

Brand: tucanourbano Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands