15
Adjustment of DELAY TIME
You can adjust the time difference between the beginning of
the source sound and the beginning of the effect sound with
the DELAY TIME keys.
The DELAY TIME keys are effective with all programs.
By applying more or less delay, sound effects, background
noise, and ambient noise coming at you from the rear speakers
can be enhanced or subdued for extra effect.
1.
PRO LOGIC
: from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
2.
PRO LOGIC
: from 15 to 30 milliseconds
ENHANCED
(Preset value: 20 milliseconds)
3. CONCERT VIDEO : from 1 to 100 milliseconds
(Preset value: 25 milliseconds)
4. MONO MOVIE
: from 1 to 100 milliseconds
(Preset value: 25 milliseconds)
5. ROCK CONCERT : from 1 to 100 milliseconds
(Preset value: 15 milliseconds)
6. CONCERT HALL : from 1 to 100 milliseconds
(Preset value: 30 milliseconds)
●
By continuously pressing “+” or “–” key, the value changes
continuously.
However, the value stops changing momentarily at the
preset point.
Notes
●
Adding too much delay will cause an unnatural effect with
some sources. Experiment with the DELAY TIME keys to
create the effect that you find most suitable.
●
The values of the DELAY TIME you set the last time will
remain memorized even when the power of this unit is off.
However, if the power cord is kept disconnected for more
than one week, these values will be automatically changed
back to the original factory settings.
+
DELAY
TIME
—
ms
NORMAL
WIDE
PHANTOM
TEST
DELAY
Adjustable
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
●
Use only AA, R6, UM-3 batteries for replacement.
●
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
●
Remove the batteries if the remote control transmitter will
not be used for an extended period of time.
●
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
Remote control transmitter operation range
Notes
●
There should be no large obstacles between the remote
control transmitter and the main unit.
●
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid direct
lighting.
2
3
1
30°
30°
Remote control
sensor
Within approximately
6 m (19.7 feet)
