Yamaha DSP-AX563, Service Manual

Page: 39 / 114

39
RX-V563/HTR-6150/DSP-AX563
RX-V563/HTR-6150/
DSP-AX563
N2V1: 94V2:128
N. A/D DATA CHECK
This menu is used to display the A/D conversion value of the microprocessor which detects panel keys of the main
unit and protection functions in using the sub-menu.
When K0/K1 menu is selected, keys become non-operable due to detection of the values of all keys. However, it is
possible to advance to the next sub-menu by turning the VOLUME of the main unit. When using this function, note
that turning the VOLUME more than 1 click would cause the volume value to change.
During signal processing, the condition before execution is maintained.
*
The figures in the diagram are given as reference only.
PD/DI
PD:
PRD (Power amplifier DC protection detection)
The output of power amplifier DC (DC voltage) is detected.
Normal value:
27 to 70 (Reference voltage: 3.3 V=255)
* If PRD is out of the normal value range, the protection function works to turn off the power.
DI: DOCK ID (DOCK ID detection)
(Reference voltage: 3.3 V=255)
N1PD: 45DI: 0
V1/V2
V1:
PRV1 (Voltage protection detection)
Voltage detects: ACL, 10V, VP, +6.3H and +3.3H
Normal value:
68 to 161 (Reference voltage: 3.3 V=255)
V2: PRV1 (Voltage protection detection)
Voltage detects: AC2, +12, -12, +5D, +5I, +5V and -5V
Normal value:
104 to 181 (Reference voltage: 3.3 V=255)
* If PRD and PRV are out of the normal value range, the protection function works to turn off the power.
DOCK detection for AD port (IC82 AD converter pin no. 4)
Pull-up resistance 10 k-ohms
DOCK type
Ohm
DKID (Pin no. 21)
DOCK
(Bluetooth)
0.56k
5-25
Reserved
2.7k
50-60
Reserved
5.6k
85-100
DOCK
(iPod)
10.0k
120-140
Reserved
18.0k
150-170
(Develop-
ment)
39.0k
195-210
No connect
–
245-255