Yamaha DSP-AX563, Service Manual

Page: 28 / 114

28
RX-V563/HTR-6150/DSP-AX563
RX-V563/HTR-6150/
DSP-AX563
C. SPEAKER SET
The analog switch settings for each sub-menu are as shown in the table below.
LARGE: This mode is used for a speaker with high bass reproduction performance (a large unit).
Full bandwidth signals are output.
SMALL: This mode is used for a speaker with low bass reproduction performance (a small unit).
The signals of 90 Hz or less are mixed into the channel specified by LFE/BASS.
NONE: This mode is used for no center speaker.
The center content is reduced by 3 dB and distributed to FRONT L/R.
SWFR: LFE of 5.1 ch signal or LFE/BASS lower than 90 Hz is output through SUBWOOFER OUT.
FRONT: LFE of 5.1 ch signal or LFE/BASS lower than 90 Hz is distributed to FRONT L/R.
C1.FRNT:SML0dB
FRONT: SML 0dB
The FRONT L/R signal, when 90 Hz or lower, is mixed to the channel specified by LFE/
BASS.
CENTER: NONE
The CENTER signal is distributed to FRONT L/R.
LFE / BASS: FRONT
The LFE (SUBWOOFER) signal is distributed to FRONT L/R.
TONE: MAX
The signal is output with the tone control [BASS +10 dB, 10 dB].
TONE: MIN
The signal is output with the tone control [BASS -10 dB, TREBLE -10 dB].
C2.CENTER:NONE
C3.LFE/B:FRNT
C4.TONE:MAX
C5.TONE:MIN
Input level Volume
SPEAKER OUT SUBWOOFER
OUTPUT
INPUT: DVD ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Both ch, -20 dBm
Both ch, -20 dBm
Both ch, -20 dBm
Both ch, -20 dBm
Both ch, -20 dBm +6.0 dB
+6.0 dB
+6.0 dB
+6.0 dB
+6.0 dB
FRONT
+11.5 dBm
+11.5 dBm
+11.5 dBm
+14.5 dBm
+8.5 dBm
CENTER
-
∞
-
∞
-
∞
-
∞
-
∞
SURROUND
-
∞
-
∞
-
∞
-
∞
-
∞
-3.5 dBm
-
∞
-
∞
-
∞
-
∞
Sub-menu
FRONT : SML 0dB
CENTER : NONE
LFE/B
: FRNT
TONE : MAX
TONE : MIN
SMALL
LARGE
LARGE
LARGE
LARGE
LARGE
NONE
SMALL
LARGE
LARGE
LARGE
LARGE
SMALL
LARGE
LARGE
SWFR
SWFR
FRONT
SWFR
SWFR
FRONT : SML 0dB
CENTER : NONE
LFE/B
: FRNT
TONE : MAX
TONE : MIN