46
Advanced
Operation
SET MENU Items
9. CINEMA EQ
Use this feature to match the tonal quality of four groups of speakers: the Main and Center speaker group, the Front Effect speakers group,
the Rear speakers group, and the Rear Center speaker group. CINEMA-EQ consists of a high-shelving equalizer (HIGH) and a parametric
equalizer (PEQ). The high-shelving equalizer changes high frequency characteristics, and the parametric equalizer boosts or cuts any selected
frequency. The equalizer can be used for a variety of purposes, such as adjusting the tonal quality of differing types of speakers, adjusting the
tonal quality in different installation environments, or adjusting the source sound to your liking.
The CINEMA EQ characteristic charts below show the value of the CINEMA EQ factory settings for each speaker group for general
listening conditions.
If you want to change the characteristics, follow the procedure below to adjust the frequency and gain for the high-shelving equalizer (HIGH)
and parametric equalizer (PEQ). For the more detailed characteristics in different settings, see “CINEMA-EQ Frequency Characteristics” on
page 82.
1
1
Press
%
or
%
(or
NEXT
) repeatedly to select one of the speaker groups and press
+
(or
SET MENU +
) to select
“ON”.
2
2
Press
%
or
%
(or
NEXT
) repeatedly to select one of the following parameters, then press
+
or
–
(or
SET MENU +
or
–
) to change the setting of that parameter.
• Each time you press
%
(or
NEXT
), the parameter changes on the front panel display as shown above. Press the cursor
%
to go
in the reverse order.
Notes:
• When the 1F. FRNT EFCT SP item is set to “NONE”, the Front Effect signals are output from the Main speakers.
• CINEMA-EQ does not work when you press
EFFECT
to turn off the effect.
▲
L.C.R. Preset Value
HIGH
: FRQ 12.7 kHz
GAIN –3 dB
PEQ
: FRQ 12.7 kHz
GAIN –4 dB
PEQ
HIGH
HIGH
+
PEQ
G
A
I
N
FRQ
▲
FRONT and REAR Preset Value
HIGH
: FRQ 12.7 kHz
GAIN 0dB
PEQ
: FRQ 8.0 kHz
GAIN –3dB
+6
+3
0
–3
–6
–9
20
50
100
200
500
1k
2k
5k
10k
20k
PEQ
HIGH
G
A
I
N
FRQ
