ADJUSTING A HEADLIGHT
It is recommended to have the headlight adjust-
ment performed by a Yamaha dealer.
The screw can be accessed from under the fender.
1.
Using a Phillips head screwdriver, turn the ad-
justing screw.
2.
Turning the screw clockwise will lower the beam
and turning the screw counter-clockwise will
raise the beam.
NOTICE
TIP
1. Adjusting screw
1
REPLACING A TAILLIGHT UNIT
1.
If a taillight does not come on, replace the tail-
light unit removing the rubber grommet from the
bezel assembly.
2.
Remove the wire connector, replace the taillight
unit, and reinstall by fitting the rubber grommet
over the taillight unit and bezel.
1. Bulb assembly
2. Rubber grommet
3. Bezel assembly
1
3
2
47
1
2
3
4
5
6
7
8
9
10
11
12
13
14
MAINTENANCE AND ADJUSTMENT
©2020
Yamaha
Golf-Car
Company
