background image

Using DM1000 Editor 

Windo

ws

Getting Star

ted

Ke

yboar

d Shor

tcuts

Inde

x

9

DM1000 Editor—Owner’s Manual

 Windo

ws

P

Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times can be 
set by dragging.

Q

Channel number

This is the channel number. Double-click the channel number to open the Selected 
Channel window.

R

AUX section

These controls are used to set the levels of the Aux Sends. To set an Aux 
Send level, drag its bar or click a point along the length of the bar. To turn 
an Aux Send on or off, click its number.

The following table shows how the Aux Send controls appear depending 
on the Aux Send On/Off and Pre/Post settings. Aux Sends can be set to 
pre-fader or post-fader on the Selected Channel window (see 

“AUX 

SEND section” on page 13

).

S

Pan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send, 
the Aux Send level in dB.

T

PAN control

This control is used to set the Input Channel’s stereo or surround pan position. 
When the PAN CONTROL in the Master Window is set to “STEREO,” the Pan con-
trol appears as a rotary control, and when set to “SURR,” the control appears as dot 
on a pan graph. The surround pan position can be set by dragging the dot. 

U

LFE control

When 5.1 or 6.1 Surround mode is selected, this control is used to set the 
surround LFE Channel level. It appears when the PAN CONTROL in the 
Master Window is set to “SURR.” To set the Channel level, drag the end of 
its bar or click a point along the length of the bar.

V

[AUTO] button

This button displays the Automix status of the Input Channel.

W

[SELECT] button

This button is used to select the Input Channel.

X

[SOLO] button

This button solos the Input Channel. It appears orange while the channel is soloed.

Y

[ON] button

This button turns the Input Channel on and off. It appears orange while the channel 
is on.

Z

Short channel name

This is the channel’s short name. To edit the name, click it and type.

a

Channel fader and channel meter

This is the Input Channel fader. The channel meter to the right of the fader displays 
the Input Channel signal level.

b

Fader value indicator

The fader value indicator indicates the fader position in decibels (dB).

P

Q

R

S

T

V

W

X

Y

Z

a

b

Aux Send status

Appearance

On or off but no level set

Dark blue bar

Off, pre-fader

Green bar outline displays level

On, pre-fader

Green bar displays level

Off, post-fader

Orange bar outline displays level

On, post-fader

Orange bar displays level

U

Summary of Contents for DM 1000































Reviews: