Panel Controls
11
Rear Panel & Connections
CD
MD
A standard pair of stereo head-
phones can be plugged in here for
private practice or late-night play-
ing. The internal stereo speaker
system is automatically shut off
when a pair of headphones is
plugged into the PHONES jack.
• Do not listen with the head-
phones at high volume for long
periods of time. Doing so may
cause hearing loss.
• Connect the DJX-II to external
equipment only after turning off
power for all devices. To prevent
damage to the speakers, set the
volume of the external devices at
the minimum setting before con-
necting them. Failure to observe
these cautions may result in
electric shock or equipment
damage.
• Connect the AC adap-
tor (PA-5B, PA-5C or
other adaptor specifi-
cally recommended by
Yamaha) to the power
supply jack.
See page 12 for details.
The LINE OUT jacks are used to send
the DJX-II output to a DJ mixer, stereo
sound system, mixing console, or tape
recorder.
The DJX-II also features MIDI terminals,
allowing you to interface the DJX-II with
other MIDI instruments and devices. (For
more information, see page 68.)
These are for recording an external audio source in
the Sampling functions (page 53).
The MIC jack is for connection to a microphone for
recording vocals and acoustic instruments.
The LINE IN jack is for connecting to and recording
a line level signal, such as that of a CD player or
cassette deck.
• Never connect a line level signal (CD player, cas-
sette deck, electronic instrument, etc.) into the
MIC input jack! Doing this could damage the
DJX-II and its Sampling functions.
Amplifier