Yamaha Diver 510N XJ6SA Owner'S Manual Download Page 63 | Manualshive

Page: 63 / 100

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

6-18

6

EAU32887

Replacing the air filter element

The air filter element should be re-
placed at the intervals specified in the
periodic maintenance and lubrication
chart. Replace the air filter element
more frequently if you are riding in un-
usually wet or dusty areas.

1. Remove the seat. (See page

3-18.)

2. Remove panels B and C. (See

page 6-8.)

3. Remove the fuel tank bolts, and

then lift the fuel tank away from the
air filter case.

4. Remove the air filter case cover by

removing the screws.

NOTICE:

When removing the air filter

case cover, be careful not to al-
low foreign objects to drop into
the air intake manifold.

[ECA12881]

5. Pull the air filter element out.

6. Insert a new air filter element into

the air filter case.

NOTICE:

Make

sure that the air filter element is
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.

[ECA10481]

7. Install the air filter case cover by in-

stalling the screws.

8. Place the fuel tank in its original

position. Make sure that the fuel
hoses are properly connected and
routed, and are not pinched. Be
sure to place the hoses in their
original position.

WARNING! Be-

fore placing the fuel tank in the
original position, make sure that
all hoses (i.e., fuel hose, fuel
tank breather hose, fuel tank
overflow hose) are not dam-
aged, that they are properly con-
nected and routed, and that they
are not pinched. If any hose is
damaged, have a Yamaha dealer
replace the hose before starting

1. Fuel tank bolt

1

1. Air filter case cover
2. Screw

1. Air filter element
2. Air intake manifold

1

2

2

2

2

1

U36DE0E0.book Page 18 Monday, August 6, 2012 5:14 PM

«
...
61
62
63
64
65
...
»

Summary of Contents for Diver 510N XJ6SA





































































































Reviews:

No comments

Related manuals for Diver 510N XJ6SA

Brand: Avenger Pages: 31

Brand: Suzuki Pages: 447

Brand: B&G electronics Pages: 3

Brand: axel joost elektronik Pages: 2

Brand: Yamaha Pages: 93

Brand: Yamaha Pages: 114

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 74

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 104

Brand: Yamaha Pages: 80

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 99

Brand: Yamaha Pages: 126

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands