Yamaha DG60FX-112, Owner'S Manual

Page: 8 / 32

8
Nomenclature
■
Rear Panel
@6
Power Switch (POWER)
Power switch for the main unit.
* To protect the speakers, set the OUTPUT knob
u
to “0”
before switching the power ON/OFF.
@7
Headphones Jack (PHONES)
Connect a pair of headphones (optional) to this jack
for private practice or practicing at night when you
don’t want to disturb others. (
→
page 11).
* Sound output from the speaker will be terminated when a
pair of headphones is connected to this jack. The audio
signal from the LINE OUT jack
@8
and the DIGITAL OUT
jack
#3
will be delivered.
@8
Line Out Jacks (LINE OUT R, L/MONO)
These jacks deliver the stereo output of the line level
signal (-3dBm/2.3k
Ω
) that is taken from before the
OUTPUT knob
u
.
By connecting the R jack to an external amp and
speaker, the combination of the two will create a
stereo guitar amp (
→
page 10).
* Use the L/MONO jack when connecting to a monaural de-
vice.
@9
POWER AMP IN Jack
The signal received by this jack is sent directly to
the internal power amp and on to the unit’s speaker.
This allows the main unit to be used as a slave am-
plifier or allow the connection of an external effector
between the LINE OUT Jack
@8
and the POWER AMP
IN Jack (
→
page 10).
* When a cable is connected to this jack, the sound produced
by the guitar connected to the INPUT jacks
q
will not be
produced by the speaker.
* The PHONES jack
@7
does not reproduce the signal received
by the POWER AMP IN jack. The sound of the guitar con-
nected to the INPUT jacks
q
can be heard in the headphones.
#0
Foot Switch Unit Terminal (FOOT SW)
Use the supplied special cable to connect the Foot
Switch Unit’s Terminal
#7
to this jack. (
→
page 10).
#1
MIDI OUT Jack
Jack used for transmitting MIDI data from the
DG60FX-112 such as control changes, program
changes, data in the DG60FX-112’s memory, etc.
(
→
page 24).
#2
MIDI IN Jack
Jack used for receiving MIDI data from a MIDI de-
vice, such as a MIDI foot controller, that can be used
to control the volume, or each of the effects and
select patches in the DG60FX-112. (
→
page 16).
Also, DG60FX-112 memory data saved to an exter-
nal MIDI device can be returned to the DG60FX-
112 via this jack. (
→
page 25)
#3
Digital Out Jack (DIGITAL OUT)
Jack used for sending the output of the DG60FX-
112 as digital data.
Connect to a device equipped with a digital input
jack (COAXIAL) such as a digital mixer, etc. (
→
page
11).
@6 @7 @8 @9 #0
#1 #2 #3