RIVAGE PM7 System Setup Guide
26
@
Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer. Different layers are recalled to the faders depending on the combination of the keys, as
shown in the table below:
#
[HOME] key
Recalls a group of settings. Press and hold down this key to store the following settings:
• Current screen
• Selected channel/parameter on the screen
• Selected layer
Front panel
1
Headphone hanger
To use the hanger, pull out the knob, and then turn it
counter-clockwise. (The hanger will be locked in
place.)
To put away the hanger, turn the knob clockwise to
unlock it, and then push it in.
2
PHONES A/B [LEVEL] knobs
Adjust the level of the signal output from the
PHONES OUT jacks respectively.
3
PHONES A/B output jacks
These are headphone jacks for monitoring the
MONITOR or CUE signal.
Key
[INPUT 1-72]
[INPUT 73-120]
[OUTPUT MIX]
[OUTPUT MATRIX]
[DCA]
[A]
Input 1-12
Input 73-84
MIX 1-12
MATRIX 1-12
DCA 1-12
[B]
Input 13-24
Input 85-96
MIX 13-24
MATRIX 13-24
DCA 13-24
[C]
Input 25-36
Input 97-108
MIX 25-36
–
–
[D]
Input 37-48
Input 109-120
MIX 37-48
STEREO
–
[E]
Input 49-60
–
MIX 49-60
CUE/MONITOR
–
[F]
Input 61-72
–
–
–
–
1
2
2
3
Summary of Contents for CSD-R7
Page 1: ...DIGITAL MIXING CONSOLE CSD R7 System Setup Guide EN ...
Page 55: ...RIVAGE PM7 System Setup Guide 55 MEMO ...
Page 56: ......
