background image

 

Introduction

 

1

 

Introduction

 

Thank you for purchasing a Yamaha CRW4416S drive.

Please read this manual before using the drive in order to make the best 

use of the superior CRW4416S functions.

After reading, please retain this manual for future reference.

 

CRW4416S Features

 

 

4xS Recording (Rewritable) - 4xS Recording (Recordable) - 

16xS Reading

 

The CRW4416S is able to write (overwrite) CD-RW discs at quad 

speed, double speed, and is able to write CD-R discs at quad speed, 

double speed, or normal speed.

CD-R discs can also be read at a maximum of 16X speed.

 

 

Compatible with Seven Different Formats

 

The CRW4416S can both record and read seven different formats: CD-

ROM, CD-ROM XA, CD-I, CD-DA, CD-Bridge (multisession), CD-

Extra, and Video CD.

The CRW4416S is also equipped with an analog audio output terminal 

(headphones) for CD-DA.

 

 

SCSI 2 Interface

 

The CRW4416S features SCSI 2 interface for connecting computers and 

peripheral devices. 

 

 

Compatible with Windows 95, Windows 98 Plug and Play

 

SCSI IDs are set automatically by the SCAM protocol (level 1).

 

 

Orange Book Part 2, Part 3 Compatible 5-Mode Recording

 

The CRW4416S conforms to the five recording modes outlined in the 

Orange Book Part 2 and 3: Track at Once, Multisession, Disc at Once, 

Session at Once, and Packet Writing.

Summary of Contents for CRW4416S - CRW - CD-RW Drive



























Reviews: