Yamaha CP5, Reference Manual

Page: 35 / 57

Internal Design of the CP5 & CP50
Reference
Left & Right Parts
R
[VOICE]
R [PRE-AMP]
R [MOD-FX]
R [PWR-AMP] (CP5 only)
R
[LEFT1]/[LEFT2]/[RIGHT1]/
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
R [COMMON]
Song Setting Area
R [SONG SETTING]
R [RECORD]
TRACK Part
R [TRACK]
MIC INPUT Part
R [MIC INPUT] (CP5 only)
Settings for All Parts
R [REVERB]
Settings for All Performances
R [MASTER COMPRESSOR]
R [UTILITY]
R [FILE]
Appendix
35 CP5/CP50 Reference Manual
Song Setting Area
The Song Setting area is used to configure tracks used to provide backing to your performances.
The Song Setting screen displayed by pressing the [SONG SETTING] button will be covered first of
all, and this will be followed by a description of the Record screen, which is accessed using the
[REC] button.
Song Setting Screen
This section describes the selection of a backing track, setting of a tempo, and other similar opera-
tions performed via the Song Setting screen, which contains three pages.
Edit Sequence
Press the [SONG SETTING] button

Navigate to the required page using the [
L
PAGE]
and [PAGE
R
] buttons  Turn or press Knobs 1 to 3
Page
On-screen name
(and full name)
Description
1 Type This parameter is used to indicate the type of data to be used as the backing
track.
Setting values: PreDrum (Preset Drum Pattern), UsrSong (User Song), or Wave
(Wave file)
NOTE
For more details regarding these setting values, refer to page 3 of Internal
Design of the CP5 & CP50.
When Type is set to “PreDrum”:
Turn Knob 2 to switch between “Phrase” and “Kit” as the type of setting to be
made. If you choose “Phrase”, you will be able to select a drum phrase number
using Knob 3. Meanwhile, if you choose “Kit”, you will be able to select a drum
kit (i.e., a set of drum sounds) using Knob 3. The name of the selected phrase
or kit will be shown at the top-right of the display.
When Type is set to “UsrSong”:
Turn Knob 3 to select a User Song number. The name of the selected User
Song will be shown at the top-right of the display.
When Type is set to “Wave”:
Turn Knob 3 to select a Wave file from the root directory of the USB flash-mem-
ory device plugged into your CP5 or CP50.
Type [8Beat ] E
PreDrum Phrase 001
For setting Number
Name of selected drum phrase or drum kit
Type [UsrSong001] E
001 UsrSong
Name of selected User Song
Number
Type
Wa
E
Wave [ ve001 ]
File name