Yamaha CP4 Stage, Owner'S Manual

Page: 33 / 60

CP4 STAGE/CP40 STAGE Owner’s Manual
33
Quick
Start Gui
d
e
3
Press the [EDIT] button.
The Edit menu will be displayed.
4
Use the [ u ] and [ d ] buttons to select
02: Part , and then press the [ENTER] button.
The Part Edit menu will be displayed. In addition, the
name of the selected Part will be displayed at the top-
left of the screen.
5
Use the [ u ] button to select 01: Play Mode ,
and then press the [ENTER] button.
6
Use the [
u
] and [
d
] buttons to move to the
screen’s second pane, and then set the
EffA/BSw parameter (Effect A/B Part Switch)
to “on” using the [ l ] and [ r ] buttons and the
Data Dial.
NOTE
On the CP4 STAGE, the EffA/BSw parameter can be
turned on for up to two Parts.
7
Press the [EXIT] button to return to the Part
Edit menu. Use the [
d
] button to select
03: Effect-A , and then press the [ENTER]
button.
The Effect A screen will be displayed.
8
Use the [
l
] and [
r
] buttons and the Data
Dial to select a category and a type for
Insertion Effect A.
9
Move the cursor ( R ) to Preset using the
[
r
] button, and select a preset* for the effect
type from Step 8 using the Data Dial. (*: Each
preset configures all parameters to suit a
specific need.)
NOTE
While each preset configures all parameters to suit a
specific need, you can adjust these parameters if
necessary. To do so, press the [
d ] button to move to the
screen’s other panes.
10
When you have finished setting Insertion
Effect A, press the [EXIT] button.
The Part Edit menu will again be displayed.
11
Use the [
d
] button to select 04: Effect-B ,
and then press the [ENTER] button.
The Effect B screen will be displayed.
12
Use the [ l ] and [ r ] buttons and the Data
Dial to select a category and a type for
Insertion Effect B.
13
Move the cursor ( R ) to Preset using the
[
r
] button, and select a preset* for the
effect type from Step 12 using the Data Dial.
(*: Each preset configures all parameters to
suit a specific need.)
14
When you have finished setting Insertion
Effect B, press the [EXIT] button.
If you would like to configure the insertion effects for
a different Part’s Voice, repeat Steps 1 and 2 to first
select the Part, and then repeat Steps 5 to 13.
EDIT
D 01:Common
E
EDIT Part:LAYER
D 01:Play Mode
E
Part:LAYER ChoSend
Play Mode 0
RevSend EffA/BSw E
40 R on W
Part:LAYER Ctg T
Effect-A R DLY Cr
ype Preset E
sDly Basic D
Effect category Effect type
Part:LAYER Ctg T
Effect-A DLY Cr
ype Preset E
sDly R Short D
Effect preset
EDIT Part:LAYER
D 03:Effect-A
E
Part:LAYER Ctg T
Effect-B R CHO G
ype Preset E
Cho Basic D
Effect category Effect type
Part:LAYER Ctg T
Effect-B CHO G
ype Preset E
Cho R Deep D
Effect preset