28
CP4 STAGE/CP40 STAGE Owner’s Manual
Quick
Start G
u
id
e
Changing Sounds Using
Controllers
Your stage piano’s control panel is equipped with a range
of different controllers — such as the pitch bend wheel,
modulation wheel, and sliders — that can be used to
change the instrument’s sound in real time. You can also
connect external controllers such as pedals via the rear
panel and assign them functions to be controlled by foot.
Pitch bend wheel
The pitch bend wheel can be used to control the pitch of
played notes in a continuously variable manner. When
you release it, the finger slot at the center will
automatically spring back to the original position, and the
pitch will return to normal. Why not take a moment now to
see how the pitch bend wheel can change the sound of
the notes you play.
Modulation wheel
The modulation wheel is normally used to add vibrato
and other suitable effects to the played notes. Why not
take a moment now to see how this wheel can change the
sound of the instrument.
Part sliders
The Part sliders are used to adjust parameter levels for
individual Parts and are located underneath the
corresponding Part buttons. Using these sliders, you can
conveniently adjust Part volumes and effect levels as you
play. The [SLIDER FUNCTION] button can be used to set
the sliders to control of the corresponding Parts’ volume,
chorus send, or reverb send levels.
NOTE
On the CP40 STAGE, the slider on the left corresponds to
the SPLIT/LAYER Part.
Adjusting Part parameters using the
Part sliders
1
Press the [SLIDER FUNCTION] button as
many times as required to select the
parameter you wish to control.
When you press the button, the name of the selected
parameter and the current values for each Part will be
displayed on-screen (see below). For each
successive press, the selected parameter will cycle
between volume, chorus send, and reverb send
levels, and the lights to the left will turn on and off
accordingly.
Pitch bend
wheel
Modulation
wheel
Pedals
(foot switches and
controllers)
Part sliders
MASTER EQ sliders
Notes are
bent
upward
Notes are
bent
downward
Effect becomes
more intense
Effect becomes
less intense
Parameter
level
increases
Parameter
level
decreases
SLIDER
SPLIT
ChoSend
(
0)
LAYER
MAIN
0
30
SLIDER
SP/LA
ChoSend
( 0
MAIN
)
30
CP4 STAGE
CP40 STAGE
Part name
Parameter
Current value
Summary of Contents for CP4 Stage
Page 1: ...EN Owner s Manual STAGE PIANO ...
Page 59: ......
