Adjust the Volume Balance and Changing Voices — Mixing Console
CVP-210/208
124
The operations for this page apply to step 2 of the procedure on page 123.
Setting the Level Balance and Voice — Volume/Voice
F
J
I
1
2
3
4
5
6
7
8
H
G
SOUND
CREATOR
DIGITAL
RECORDING
MIXING
CONSOLE
BALANCE
CHANNEL
ON OFF
PART
PART
A
E
D
C
B
F
J
I
1
2
3
4
5
6
7
8
DIGITAL
STUDIO
H
G
Set this to ON to enable automatic replacement of
the XG voices (in XG song data) with the special
voices of the CVP-210/208. To use the normal XG
voice set, turn this off.
These let you select the voice of each part, and adjust the panpot and volume.
VOICE
Calls up the VOICE display, from which you can select the desired voice (page 58). When the
Style part is selected, neither Organ Flutes voices nor User voices can be selected. When the
Song part is selected, User voices cannot be selected.
PANPOT
Determines the stereo position of the selected voice or track. A setting of 0 pans the sound
hard left, while 64 is at center, and 127 is at hard right.
VOLUME
Determines the level of each channel, giving you fine control over the balance of all the parts.
Selects the XG voices
to be replaced (voices
usually used when
playing back).
Selects the voices used to
replace the XG voices (when
SONG AUTO REVOICE is
set to ON).
Executes the settings and closes the
Auto Revoice Setup display.
Closes the Auto Revoice
Setup screen without
executing the settings.
1
2
Each press of
this button
switches
among the
various parts/
channels.
Use these to select the VOICE,
PANPOT, or VOLUME
parameter rows.
Allows you to
select the specific
voice to be
replaced.
PIANO, BASIC and DRUM
can be called up simulta-
neously.
ALL REVOICE
Replaces all of the replaceable XG voices with the
rich and authentic voices of the CVP-210/208.
PIANO REVOICE
Replaces only the piano
voices.
BASIC REVOICE
Replaces only the
recommended voices that are
suitable for playing back the
song.
ALL NO REVOICE
All the voices are returned
to the original XG voices.
When changing the rhythm/
percussion voices (drum
kits, etc.) of the accompani-
ment style and song from
the VOICE parameter, the
detailed settings related to
the drum voice are reset,
and in some cases you may
be unable to restore the
original sound. In the case
of song playback, you can
restore the original sound
by returning to the begin-
ning of the song and playing
back from that point. In the
case of accompaniment
style play, you can restore
the original sound by select-
ing the same style again.
Keep in mind that using the
Revoice function may result
in unnatural or unexpected
sound, depending on the
particular song data.
DRUM REVOICE
Replaces only the drum
revoices.
The [RHY1] channel in the
STYLE PART display can be
assigned to any voice except
for the Organ Flute voice.
n
When playing GM song data,
channel 10 (in the SONG
CH 9 - 16 page) can only be
used for a Drum Kit voice.
Summary of Contents for Clavinova CVP-208
Page 175: ...MEMO 175 CVP 210 208 MEMO ...
Page 176: ...MEMO CVP 210 208 176 MEMO ...