19
CLP-920/CLP-930
Hammer, White Key
Slit
Flame
Stopper L88
Frame
Hook
Spring
Upside
[E]
[F]
White Key
Key Guide
Key Spring
15
Assembling the GH keyboard
15-A Hammer of White (Black) Key
Place the GH keyboard assembly upside down, in-
sert a hammer assembly into the frame, and put the
stopper L88 on. (Fig. 20)
* There are four kinds of hammers that differ in weight.
(See parts list.)
15-B Key Spring
Place the GH keyboard assembly rightside up, and
fix a key spring to the frame by setting it at the slit
and pushing it down once. (Fig. 21)
* Be careful of the direction of the spring.
15-C White (Black) Key
After a key has been fit to part [F] and the key
guide, make sure that the spring is fixed to the key.
Then press part [E] of the key down. (Fig. 22)
15-D AEXL88-L circuit board
Tighten the seven (7) screws marked [260a] to fix
the AEXL88-L circuit board. (Fig. 15)
15-E AEXL88-H circuit board
Tighten the ten (10) screws marked [260b] to fix the
AEXL88-H circuit board. (Fig. 15)
* Set the slits of the rubber contact at the makes on
the frame.
(Fig. 20)
(Fig. 21)
(Fig. 22)
