CLP-150/CLP-150M/CLP-150C
13
18.
Headphones Jack Assembly, HP Circuit
Board
(Time required : About 30 minutes)
18-1
Remove the top board assembly. (See procedure 2)
18-2
Remove the key cover assembly. (See procedure 9)
18-3
Remove the panel assembly. (See procedure 13)
18-4
Remove the end block assembly L. (See procedure 15)
18-5
Remove the three (3) screws marked [81H]. The
headphones jack assembly can then be removed.
(Fig. 18)
18-6
Remove the two (2) hexagonal nuts marked [3B]. The
headphone angle can then be removed from the HP
circuit board. (Fig. 18-1)
(Fig. 19)
(Fig. 18-1)
(Fig. 18)
[81H]: Bind Head Tapping Screw-1 3.5x12 MFZN2Y (EP030240)
[3B]: Hexagonal Nut 12.0 14x2 MFZN2BL (VB508600)
[6C]: Bind Head Tapping Screw-1 3.5x12 MFZN2BL (EP030340)
[60A]: Bind Head Tapping Screw-1 3.5x16 MFZN2Y (EP030190)
[3B]
[3B]
HP
Headphone angle
[81H]
Headphones jack assembly
19.
PL Circuit Board
(Time required : About 30 minutes)
19-1
Remove the top board assembly. (See procedure 2)
19-2
Remove the key cover assembly. (See procedure 9)
19-3
Remove the speaker box assembly. (See procedure 11)
19-4
Remove the rack assembly. (See procedure 12)
19-5
Remove the panel assembly. (See procedure 13)
19-6
Remove the end block assembly L and R.
(See procedure 15)
19-7
Remove the keyboard assembly. (See procedure 17)
19-8
Remove the screw marked [6C]. The PL circuit board
can then be removed. (Fig. 19)
PL
[6C]
[60A]
Front rail assembly
20.
Front Rail Assembly
(Time required : About 40 minutes)
20-1
Remove the top board assembly. (See procedure 2)
20-2
Remove the key cover assembly. (See procedure 9)
21-3
Remove the speaker box assembly. (See procedure 11)
21-4
Remove the rack assembly. (See procedure 12)
20-5
Remove the panel assembly. (See procedure 13)
20-6
Remove the end block assembly L and R.
(See procedure 15)
20-7
Remove the keyboard assembly. (See procedure 17)
20-8
Remove the two (2) screws marked [60A] from both
sides of the assembly. (Fig. 19)
20-9
Remove the seven (7) screws marked [55A]. The front
rail assembly can then be removed. (Fig. 20)
[55A]
(Fig. 20)
[55A]: Truss Head Tapping Screw-1 3.5x30 MFZN2BL (VU952600)
Front rail assembly