English
11
En
Normal illumination
Slightly dim
Dim
Notes
●
When the automatic spacing function is in effect, the display of
the total time and of the total remaining time includes each
interval of the 4 seconds between tracks.
●
When the automatic spacing function is in effect during the
playback, “AUTO SPC 4” (the remaining seconds of the
interval) appears and is counted down each time blinking at the
interval between the tracks.
You can change brightness of the display
in three degrees by pressing
DIMMER
.
If you record a disc onto tape with an insufficient time space between tracks, the tape deck will not be able to perform blank
search operations on the tape correctly. To enable a track search operation, use this function to add an interval of about 4
seconds between tracks.
Changing brightness of the display
DIMMER
SPACE
Automatic spacing
Press
SPACE
to light up the current setting.
Light up about 3 seconds.
While the current setting is lit up, press
SPACE
to
change the setting between “AUTO SPACE ON” and
“AUTO SPACE OFF”.
Adjusting the output level
You can adjust the level of signals output to the amplifier by
pressing
OUTPUT LEVEL +/–
.
OUTPUT
LEVEL
Note
While playing back an MP3/WMA disc, the level of the audio
signal sent to the DIGITAL OUT (OPTICAL) terminal is fixed at
maximum regardless of the displayed volume level.
01En_02_BOD_CDX-397MK2_G.p65
1/23/07, 13:41
11
Summary of Contents for CDX-397MK2
Page 228: ......
