Yamaha CDR-S1000, Service Manual

Page: 6 / 48

CDR-S1000
CDR-S1000
■
INTERNAL VIEW
■
DISASSEMBLY PROCEDURES
(Remove parts in disassembly order as numbered.)
t !1
q w
y i u o !0
r e
q
ANALOG P.C.B. (3)
w
MAIN P.C.B. (1)
e
CDR MECHANISM UNIT
r
ANALOG P.C.B. (1)
t
PANEL P.C.B. (5)
y
ANALOG P.C.B. (2)
u
PANEL P.C.B. (1)
i
MAIN P.C.B. (2)
o
PANEL P.C.B. (2)
!0
PANEL P.C.B. (3)
!1
PANEL P.C.B. (4)
CDR MECHANICAL UNIT REPLACEMENT
• When sending back the defective CDR mechanical unit for repair, send the whole unit.
• The CDR mechanical unit must be replaced as a unit. None of its components can be supplied separately.
• When sending back the defective CDR mechanical unit for repair, attach the disc which was used when the error
occurred as necessary. However, Yamaha shall not be liable even if the data in the disc has become unreadable while
the unit is being serviced/repaired.
Preparation before Replacement
a. When replacing the CDR mechanical unit, write down the following items.
• Serial No. of the product and the symptom in detail
• Mechanical serial No. / mechanical shipping serial No. of CDR mechanical unit
b. Prepare a lens cover (P/No. V4870500) to use when transporting the CDR mechanical unit.
Mechanical serial No. Shipping serial No.
Lens cover
5