Yamaha CC-5 Page 36 Owner'S Manual Download

Page: 36 / 40

E-34

Auxiliary (AUX)

Connect the output lead of a video cassette player, video
disc player, etc. to the AUX inputs of this unit.
(red

→

right channel, white

→

left channel)

Select the AUX position with the INPUT selector.

Operate the unit connected to the AUX inputs.

Start recording with this unit, if so desired. (See page 30.)

Auxiliary (DAT) (U.S.A., Canada
and General models)

Connect the output lead of a DAT or another input source.
(red

→

right channel, white

→

left channel)

Select the DAT position with the INPUT selector.

Operate the unit connected to the DAT inputs.

Start recording with this unit, if so desired.
(See page 30.)

Turntable (PHONO) (U.K., Australia
and Europe models)

Connect the output lead of a turntable.
(red

→

right channel, white

→

left channel)

Connect the GND lead of a turntable.

Select the PHONO position with the INPUT selector.

Operate the turntable.

Start recording with this unit, if so desired. (See page 30.)

USING EXTERNAL UNITS

Summary of Contents for CC-5









































Search results

Summary of Contents for CC-5

Reviews:

Related manuals for CC-5

Brands by name

Popular brands

Yamaha CC-5, Owner'S Manual

Search results

Summary of Contents for CC-5

Reviews:

Related manuals for CC-5

Brands by name

Popular brands