Yamaha BWS CW50L Owner'S Manual Download Page 40

Page: 40 / 68

PERIODIC MAINTENANCE AND MINOR REPAIR

6-8

EAUM1640

Cleaning the air filter element

The air filter element should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
Clean the air filter element more fre-
quently if you are riding in unusually
wet or dusty areas.

1. Remove the air filter case cover by

removing the screws.

2. Pull the air filter element out, clean

it with solvent, and then squeeze
the remaining solvent out.

WARNING

EWA10430

Use only a dedicated parts cleaning
solvent. To avoid the risk of fire or
explosion, do not use gasoline or
solvents with a low flash point.

CAUTION:

ECA10510

To avoid damaging the foam materi-
al, handle it gently and carefully, and
do not twist or wring it.

3. Apply oil of the recommended type

to the entire surface of the ele-
ment, and then squeeze the ex-
cess oil out.

NOTE:

The air filter element should be wet but
not dripping.

4. Insert the element into the air filter

case.

CAUTION:

ECA10480

●

Make sure that the air filter ele-
ment is properly seated in the
air filter case.

1. Air filter case cover

ZAUM0567

1. Air filter element

ZAUM0318

Recommended oil:

Engine oil

ZAUM0156

Summary of Contents for BWS CW50L





































































Search results

Summary of Contents for BWS CW50L

Reviews:

Related manuals for BWS CW50L

Brands by name

Popular brands

Yamaha BWS CW50L, Owner'S Manual

Search results

Summary of Contents for BWS CW50L

Reviews:

Related manuals for BWS CW50L

Brands by name

Popular brands