Fig. 5
This
u
nit
FL display
<Operation>
The operation consists of 2 parts as follows.
Procedure 1 to 8: Writing OPU Parameter
Procedure 9 to 13: Disc Playback Capability Check
1. Press the “ ” (On/standby) key to turn on the power.
2. Start up Rpower.exe.
The screen appears as shown below. (Fig. 6)
3. Select the port and baud rate. (Fig. 6)
• COM port: Select the USB port of PC connected to the USB–UART conversion adaptor.
• Baud rate: Select “115200”.
Fig. 6
Rpower8550 5.12.61 (2010/07/15) SONY KEM470 Ver.A
−−−
ComPort 6
−−−
P O W E R O N
N O D I S C
FL display
27
BRX-610/NS-PZ20
BRX-61
0/NS-PZ20