page 23
9.
Loosen the white 8-pin and
white
3-pin connector on the motor.
If you cannot find the connectors directly, please follow the
cables in the frame. The connectors are secured with a snap-in
lug. Press it gently. (E.g., with a narrow-slotted screwdriver)
10.
Connect the 4 connectors of the bikespeed-RS with the
corresponding counterparts of the newly disconnected
connections. Please use exclusively
white
connectors!
If you can not find the 3-pin white connector, please follow the
cable from the speed-sensor at the rear wheel.
