manualshive.com logo in svg

Yamaha BIG BEAR YFM400FWS, Owner'S Manual, Page: 147 / 173

Share
Download
Yamaha BIG BEAR YFM400FWS Owner'S Manual Download Page 147

8-38

1. Headlight bulb holder cover

2. Headlight bulb holder

6. Put a new headlight bulb into position,

and then secure it in place with the bulb
holder.

1. Do not touch the glass part of the bulb.

CAUTION:

_ 

Do not touch the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the luminos-
ity of the bulb, and the bulb life will be ad-
versely affected. Thoroughly clean off any
dirt and fingerprints on the headlight bulb
using a cloth moistened with alcohol or
thinner. 

_

WARNING

POTENTIAL HAZARD 
A headlight bulb is hot when it is on and
immediately after it is turned off. 
WHAT CAN HAPPEN 
You can be burned, or a fire could start
if the bulb touches something flamma-
ble. 
HOW TO AVOID THE HAZARD 
Wait for the bulb to cool before touching
or removing it.

U5FU14.book  Page 38  Thursday, April 3, 2003  1:19 PM

Summary of Contents for BIG BEAR YFM400FWS














































































































































































Reviews:

No comments