manualshive.com logo in svg

Yamaha BIG BEAR YFM400FWS, Owner'S Manual, Page: 135 / 173

Share
Download
Yamaha BIG BEAR YFM400FWS Owner'S Manual Download Page 135

8-26

EBU11870

Front brake lever free play

The front brake lever should have a free play
of zero mm (zero in) at the lever end. If not,
have a Yamaha dealer check the brake sys-
tem.

a. Front brake lever free play

WARNING

POTENTIAL HAZARD 
Operating with improperly serviced or
adjusted brakes. 
WHAT CAN HAPPEN 
You could lose braking ability, which
could lead to an accident. 
HOW TO AVOID THE HAZARD 
After servicing: 

●

Make sure the brakes operate
smoothly and that the free play is cor-
rect. 

●

Make sure the brakes do not drag. 

●

Make sure the brakes are not spongy.
All air must be bled from the brake
system. 

Replacement of brake components re-
quires professional knowledge. These
procedures should be performed by a
Yamaha dealer. 

U5FU14.book  Page 26  Thursday, April 3, 2003  1:19 PM

Summary of Contents for BIG BEAR YFM400FWS














































































































































































Reviews:

No comments