Yamaha BEARTRACKER YFM250XN Owner'S Manual Download Page 107

Page: 107 / 156

8-4

It is recommended that these items be serviced by a Yamaha dealer.

** Lithium soap base grease

Clutch*

• Check operation.
• Adjust if necessary.

Wheels*

• Check balance/damage/runout.
• Repair if necessary.

Wheel bearings*

• Check bearing assembly for looseness/damage.
• Replace if damaged.

Front and rear
suspension*

• Check operation.
• Correct if necessary.

Steering system*

• Check operation.
• Correct if damaged.
• Check toe-in.
• Adjust if necessary.

Steering shaft*

• Lubricate every 6 months.**

Fittings and Fasteners*

• Check all chassis fittings and fasteners.
• Correct if necessary.

Battery*

• Check specific gravity.
• Check that the breather hose is working properly.
• Correct if necessary.

ITEM

ROUTINE

INITIAL

EVERY

month

months

year

WARNING

Indicates a potential hazard that could
result in serious injury or death.

Summary of Contents for BEARTRACKER YFM250XN





























































































































































Search results

Summary of Contents for BEARTRACKER YFM250XN

Reviews:

Related manuals for BEARTRACKER YFM250XN

Brands by name

Popular brands

Yamaha BEARTRACKER YFM250XN, Owner'S Manual

Search results

Summary of Contents for BEARTRACKER YFM250XN

Reviews:

Related manuals for BEARTRACKER YFM250XN

Brands by name

Popular brands