21
Assembly
2.
Rotate the bass joint so that the tenor joint
comes into contact with the stopper on
the bass joint.
Bass Joint
Insert halfway
Double Joint
Stopper
3.
Continue to insert the bass joint, all the
way into the socket.
Fully insert
Attaching the Bell
• As shown in the illustration below, gently
hold the bell key pad down to raise the
connection at the opposite end, and insert
the bell section into the bass joint.
* Take care not to apply too much pressure
on the bell key pad.
Attaching the Hand Rest
1.
Screw the hand rest into its holder
stopping at a comfortable position.
* Take care not to over tighten the hand rest.
2.
Tighten the ring on the screw to secure
the hand rest.
bassoon̲om̲003-064-080707.pm
08.7.7, 3:04 PM
Page 21
Adobe PageMaker 6.5J/PPC
