manualshive.com logo in svg

Yamaha BANSHEE YFZ350S, Owner'S Manual

Share
Download
Yamaha BANSHEE YFZ350S Owner'S Manual Download Page 66

7-4

RIDE WITH CARE AND GOOD JUDGE-
MENT

Get training if you are inexperienced.

Beginners should get training from a certified
instructor.
Become familiar with this ATV at slow speeds
first, even if you are an experienced operator. Do
not attempt to operate at maximum performance
until you are totally familiar with the ATV’s han-
dling and performance characteristics.

Riding your ATV requires skills acquired
through practice over a period of time.

Take the time to learn the basic techniques
well before attempting more difficult maneu-
vers.

POTENTIAL HAZARD

Operating this ATV without proper
instruction.

WHAT CAN HAPPEN

The risk of an accident is greatly
increased if the operator does not know
how to operate the ATV properly in dif-
ferent situations and on different types
of terrain

HOW TO AVOID THE HAZARD

Beginning and inexperienced operators
should complete the certified training
course offered by Yamaha. They should
then regularly practice the skills learned
in the course and the operating tech-
niques described in this Owner ’s
Manual.
For more information about the training
course, contact an authorized ATV deal-
er or call 1-800-887-2887.

q

WARNING

 5FK-9-16-02  3/11/03 1:08 PM  Page 4

Summary of Contents for BANSHEE YFZ350S













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands