manualshive.com logo in svg

Yamaha BANSHEE YFZ350S, Owner'S Manual

Share
Download
Yamaha BANSHEE YFZ350S Owner'S Manual Download Page 60

EBU00221

Accessories and loading

EBU00222

Accessories

Accessories can affect the handling and con-
trol of your ATV. Keep the following in mind
when considering an accessory or operating
an ATV which has accessories.

8

Choose only accessories designed for your
ATV. Your Yamaha dealer has a variety of
genuine Yamaha accessories. Other acces-
sories may also be available on the market.
However, it is not possible for Yamaha to
test all non-Yamaha accessories, nor have
any control over the quality or suitability of
them. Choose a genuine Yamaha accesso-
ry, or one that is equivalent in design and
quality.

8

Accessories should be rigidly and securely
mounted. An accessory which can shift
position or come off while you are riding
could affect your ability to control the ATV.

8

Do not mount an accessory where it could
interfere with your ability to control the ATV.
Examples include (but are not limited to) a
heavy or bulky object attached to the han-
dlebars which could make steering difficult,
an accessory that limits your ability to move
around on the seat, or one that limits your
view.

8

Use extra caution when riding an ATV with
accessories. The ATV may handle different-
ly than it does without accessories.

6-10

 5FK-9-16-01  3/13/03 11:14 AM  Page 58

Summary of Contents for BANSHEE YFZ350S













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands