8-25
1
2
3
4
5
6
7
8
9
10
11
Carburetor setting chart
Changing the settings of the carburetors
To change the settings of the carburetors, you
need to disassemble and remove them. Follow the
procedures for both carburetors.
Disassembling and removing the carburetors
1. Turn the fuel cock to the “OFF” position.
2. Turn out the carburetor drain screw to drain
the fuel.
3. Remove the seat.
4. Remove the radiator cover and side cover by
removing the screws.
5. Disconnect the fuel hoses.
Temperature
Altitude
0–1500 m (5000 ft)
Above 1500 m (5000 ft)
Main jet
Jet needle
Pilot air screw
Main jet
Jet needle
Pilot air screw
Above 0 °C (32 °F)
#200
3rd groove
2.0 turns out
#190
3rd groove
2 1/2 turns out
from +5 °C (41 °F) to
–15 °C (5 °F)
#220
3rd groove
1 1/2 turns out
#200
3rd groove
2.0 turns out
from –10 °C (14 °F) to
–30 °C (–22 °F)
#240
4th groove
1 1/2 turns out
#220
3rd groove
1 1/2 turns out
1. Radiator cover
2. Side cover
3. Screw
1
2
3
3
3
3
✦✯✬✩✧✤✲✣ ✥
Summary of Contents for BANSHEE 350 YFZ350Z
