This will prevent damage to the speakers. If the monitoring
system is turned on first, then when the AW2400 and the other
equipment is turned on a loud ‘pop’ will be produced which may
damage the speakers.
When turning the equipment off the reverse order should be used:
5.
Turn off the monitoring system connected to the AW2400s Monitor
Outputs.
5.
Turn off the AW2400. To access the AW2400s shutdown screen press
the
[SONG]
key until the Song List page is displayed then cursor to
SHUTDOWN and press the
[ENTER]
key.
5.
Turn off external devices such as audio sources and effects processors
connected to the AW2400.
Recording
When everything is set up and connected properly, you can begin
recording. The first step in the recording process is to create a new song.
When you start the AW2400 for the first time, an empty song will be loaded
automatically. If you use this automatically loaded song, then there is no need to create a new
song.
Creating a New Song
1.
In the Work Navigate Section press the
[SONG]
key until the Song List page is displayed.
5
