19
USING B
ASIC FUNCTIONS
English
BASIC PLAYBACK
Basic operations
You can play the software loaded on the audio and video
components connected to this system.
Indication on the front panel display (example):
1
Press POWER (
) to turn on the power.
2
Turn on the AV component connected to this
system.
3
Press INPUT on the front panel repeatedly
(one of the input selector buttons on the
remote control) to select the input source.
The selected input source name and input mode
appear on the front panel display for a few seconds.
4
Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the
component.
AUDIO
POWER
TV MODE
POWER
TUNER
VCR
VIDEO 2
VIDEO 1
CD
ENTERTAINMENT
ROCK
JAZZ
HALL
4
3
2
1
MOVIE 2
MOVIE 1
MONO MOVIE
SPORTS
8
7
6
5
STEREO
MATRIX 6.1
SELECT
/DTS
CANCEL
10
0
9
CODE SET
TV
AV
SLEEP
INPUT
VOL
CH
MUTE
SUBTITLE
REC
TOP MENU
MENU
LEVEL
SET MENU
TEST
B.BOOST
ON SCREEN
RETURN
ABCDE
MUTE
VOL
PRESET
PRESET
ENTER
CH
CH
DVD
AMP
POWER ( )
MUTE
B.BOOST
SLEEP
VOL + / –
Input selector
buttons
DSP program
buttons
V I D E O
1
A U T O
VIDEO 1
SP
Selected input source
Input mode
5
Adjust the volume to the desired level.
The volume level is displayed digitally.
Example:
–70 dB
Control range: VOLUME MUTE (minimum) to
0 dB (maximum)
Note
• If you have connected a recording component to the VCR OUT
jacks, and you notice distortion or low volume during playback
of other components, try turning the recording component on.
■
Enhancing the bass tones
First press AMP, then press B. BOOST.
• “Bass Boost ON” appears in the display.
• This function enhances the bass tones of the
subwoofer by increasing the level of the low-range
frequencies.
• To cancel B. BOOST mode, press B. BOOST
again.
y
• The B. BOOST mode does not function when the headphones
are connected.
Note
• If a thudding noise is heard from the subwoofer when this
function is turned on, lower the subwoofer level. Otherwise, the
subwoofer may be damaged due to an excessive input level of
low-bass signal.
■
To mute the sound
Press MUTE on the remote control.
To resume the audio output, press MUTE again.
y
• You can also cancel mute by pressing VOL +/–, etc.
• During muting, the “MUTE” indicator flashes on the front
panel display.
(U.S.A. model)
E4-S80-19-26(6.29)b
02.6.29, 4:33 AM
19
