Yamaha AVENTAGE RXA780BL Owner'S Manual Download

Page: 178 / 201

When finished entering the key, use the cursor keys to select

“NEXT” and press ENTER.

Use the cursor keys to select the encryption method.

Choices

None, WEP, WPA-PSK(AES), Mixed Mode

NOTE

If you select “None”, the connection may be insecure since the communication is not encrypted.

Use the cursor keys to select “NEXT” and press ENTER.

The edit screen appears.

NOTE

If you select “None” in step 5, this item is not available.

Use the cursor keys and ENTER to enter the security key.

When finished entering the key, use the cursor keys to select
“NEXT” and press ENTER.

The manual setting screen appears on the TV.

Use the cursor keys to select “CONNECT” and press ENTER to

start the connection process.

When the connection process finishes, “Completed” appears on the TV

screen.

If “Not connected” appears, check that all the information is entered

correctly, and repeat from step 1.

Press SETUP.

This completes the network settings.

178

Summary of Contents for AVENTAGE RXA780BL










































































































































































































Search results

Summary of Contents for AVENTAGE RXA780BL

Reviews:

Related manuals for AVENTAGE RXA780BL

Brands by name

Popular brands

Yamaha AVENTAGE RXA780BL, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RXA780BL

Reviews:

Related manuals for AVENTAGE RXA780BL

Brands by name

Popular brands